Suunto D3 사용자 설명서
52
battery is changed (assuming that the replacement has been done according to
the instructions).
the instructions).
DIVE PROFILE MEMORY [PRO]
The scrolling of the profi le will start automatically when the Profi le/logbook page
IV is entered (Fig. 5.6.).
The scrolling of the profi le will start automatically when the Profi le/logbook page
IV is entered (Fig. 5.6.).
The dive time is displayed in sampling increments with each display being shown
for about two seconds. The depths shown are the maximum values of each sam-
pling interval.
for about two seconds. The depths shown are the maximum values of each sam-
pling interval.
After the last depth fi gure of the selected profi le, the D3 automatically returns
to Display I of the same dive in the Logbook. If desired, the profi le of the same
dive can be recalled again following the above procedure.
to Display I of the same dive in the Logbook. If desired, the profi le of the same
dive can be recalled again following the above procedure.
The scrolling of the profi le can be stopped by pressing any button.
• Press S to stop the scrolling and to return to Display I of the same dive
in the Logbook.
•
Press + to stop the scrolling and to change to scrolling the next dive in
the Logbook.
the Logbook.
•
Press - to stop the scrolling and to change to scrolling the previous dive
in the Logbook.
in the Logbook.
• Press M to stop the scrolling and to return to the beginning of the Log-
book.
• Press
M two (2) times to exit the Logbook Memory [LOG] and enter the
Memory Mode [MEM].