Suunto D3 사용자 설명서
63
and sand particles have been fl ushed out. Check the display for possible moisture
or water. DO NOT use the D3 if you detect any moisture or water inside.
or water. DO NOT use the D3 if you detect any moisture or water inside.
CAUTION!
•
do not use compressed air to blow water off the unit
•
do not use solvents or other cleaning fl uids that might cause damage
•
do not test or use the D3 in pressurized air
6.3. WATER RESISTANCE INSPECTION
Water resistance of the unit must be checked after replacement of the battery, or
after other service operations. The check requires special equipment and train-
ing.
after other service operations. The check requires special equipment and train-
ing.
You must frequently check the display for any sign of leaks. If you fi nd moisture
inside your advanced computer watch, there is a leak. A leak must be corrected
without delay, as moisture will seriously damage the unit, even beyond repair.
SUUNTO does not take any responsibility for damage caused by moisture in the
D3, if the instructions of this manual are not carefully followed.
inside your advanced computer watch, there is a leak. A leak must be corrected
without delay, as moisture will seriously damage the unit, even beyond repair.
SUUNTO does not take any responsibility for damage caused by moisture in the
D3, if the instructions of this manual are not carefully followed.
In case of a leak immediately bring the D3 to an authorized SUUNTO dealer or
distributor.
distributor.