Avaya 4400 사용자 설명서

The following functions provide both number storage plus additional 
functions and DSS key lamp usage.  
To store user, park slot and queue numbers under a DSS key:. 
1. Press Menu 

 twice. 

2. Press  and select ProgA. 
3. Press  and select DSS. 
4.  The options shown are Park, User, Group and Dial. 

•  Park:  

Monitor a call park slot by entering the slot number (the extension 
number followed by a single digit). When a call is parked in that slot 
the DSS key flashes. If you press the key you have options to Drop 
or Answr the call. 

•  User:  

Monitor another extension. If the extension is ringing the lamp 
flashes and when you press the DSS key you can see details of the 
caller and have a DPkUp option to answer the call yourself. When 
the lamp is on the extension is busy and pressing the DSS key 
display information about any call in progress. 

•  Group:  

Monitor the status of a hunt group queue. Flashes green is a call is 
incoming to the group. Flashes red if the group has queued calls. 
Press the key to show call information, press the key again to pickup 
a call.  

•  Dial:  

This is similar storing a general number but the DSS lamp remains lit 
until the call is disconnected.  

•  Flash:  

Send a hook flash signal to the current connected line.  

5.  Enter the number to store under the key (the park slot, user, group or 

dial number). Use the left-hand display key to backspace. 

6.  Press the DSS key under which you want to store the function. 

•  If the DSS key is already set you will see options to Replace, Keep 

or Delete the existing function. Select the option required. 

7. When BUTTON PROGRAMMED is shown select Cont. 
8. Press Exit 

.