Panasonic SC-VKX65 사용자 설명서

15

RQT9951

Signal type/data
LPCM/PPCM/GD/DTS/MP3/MPEG:
Signal type kHz (sampling frequency)/bit/ch (number of 
channels)
Example: 3/ 

2 

.1ch

 
 

    .1: Low frequency effect

 

    (not shown if there is no signal)

 

  0: No surround

 

  1: Mono surround

 

  2: Stereo surround (left/right)

 1: 

Center

 

2: Front left + Front right

 

3: Front left + Front right + Center

 It can be a while before playback starts if you 

change the audio of a Xvid disc.

 PLAY SPEED

 

Change play speed
– from “x0.6” to “x1.4” (in 0.1-unit step)
• Press [4/9] two times to continue normal playback.
• After you change the speed:

 

− Audio output will switch to 2-channel stereo.

 

− Sampling frequency of 96 kHz is converted to 

48 kHz.

  REPEAT MODE

(Z 12, “Repeat playback”)
A-B Repeat: Repeat a specified section
Except 

 

 

 (still picture part) 

 

(SVCD only)
Press [OK] at the start and end points.
• To cancel, select “OFF”.

  SUBTITLE

 (with multiple subtitles) 

 (SVCD only)

Select subtitle language
• For +R/+RW disc, a number display will replace the 

subtitles that cannot be shown.

 (with subtitle on or off information)

ON 

↔ OFF

ANGLE

 (with multiple angles)

Select a video angle

DATE DISPLAY

Show the date of a picture
ON 

↔ OFF

ROTATION

Rotate a picture (during pause)

0 

↔ 90 ↔ 180 ↔ 270

█  Menu 2 (Video)

PICTURE MODE

NORMAL: Normal 

images.

CINEMA1: 

Mellows images and enhances details in 
dark scenes.

CINEMA2: 

Sharpens images and enhances details in 
dark scenes.

DYNAMIC:  Enhances the contrast for powerful images.
ANIMATION: Suitable for animation.

  ZOOM

Select zoom sizes
NORMAL, AUTO (

 

 

 

), x2, 

x4

 (during pause)

 TRANSFER MODE 

Select the method of conversion for video output 
accordingly

When playing PAL discs
AUTO:  Converts the film and video automatically.
VIDEO:  Select when the content is distorted in the 

“AUTO” mode.

FILM: 

Select when the edges of the film content are 
jagged or rough in the “AUTO” 
mode.

 

But, if the video content is 
distorted (as illustrated on 
the right), then select “AUTO”.

When playing NTSC discs
AUTO1:  Converts the film and video automatically.
AUTO2:  Select to automatically sense the differences in 

the frame rates of the film content and converts 
it accordingly.

VIDEO:  Select when the video content is distorted in 

the “AUTO1” or “AUTO2” mode.

  SOURCE SELECT

AUTO: 

Converts the Xvid content 
automatically.

INTERLACE: 

Select if the Xvid content was encoded 
in interlace format.

PROGRESSIVE:  Select if the Xvid content was encoded 

in progressive format.

█  Menu 3 (Audio)

DIALOGUE ENHANCER

Make the dialogue in films easier to hear

 (Dolby Digital, DTS, 3-channel or higher, with the 

dialogue recorded in the center channel)

 (Dolby Digital, 3-channel or higher, with the 

dialogue recorded in the center channel)
ON 

↔ OFF

SC-VKX65GAGS_RQT9951-B_En.indd   15

SC-VKX65GAGS_RQT9951-B_En.indd   15

8/18/2014   3:31:35 PM

8/18/2014   3:31:35 PM

Confidential 

Until: