Netgear XCM8944 사용자 설명서
13
used by the computer NIC port when in DHCP-client mode without
a DHCP server present. Use this IP value to log in to the switch.
a DHCP server present. Use this IP value to log in to the switch.
Computer with a Static IP Address
When the computer is in this mode, the switch must also be
assigned a static IP address. To assign a static IP address, connect
a VT100/ANSI terminal or a workstation to one of the switch’s
console ports. A cable for the mini USB port and a straight-through
RJ-45 cable are supplied.
assigned a static IP address. To assign a static IP address, connect
a VT100/ANSI terminal or a workstation to one of the switch’s
console ports. A cable for the mini USB port and a straight-through
RJ-45 cable are supplied.
¾
To configure the switch:
1. Start a terminal emulation program (TEP).
2. Connect your computer to a mini USB or RJ-45 console port on
2. Connect your computer to a mini USB or RJ-45 console port on
the front panel of the blade.
Use the installation CD to install the USB driver on your
computer.
computer.