Sharp AL-1035-WH 사용자 설명서

→ Check if the "Paper Size" options suit the size of the paper loaded 

in the feed tray.

→ If the "Fit To Paper Size" setting is activated, make sure that the 

paper size selected from the drop-down list is the same as the 
size of the loaded paper.

–

→ Click the "Main" tab in the printer driver setup screen, and verify if 

the "Image Orientation" option is set to your requirements.

–

→ Make sure that the paper is properly loaded.

→ Check the layout of the document margins and the paper size 

settings for the application you are using. And check if the print 
settings are specified correctly to suit the paper size.

–

→ You can adjust the print density on the printer driver. Click the 

"Advanced" tab in the printer driver setup screen and select the 
"Density Adjustment" from 1 (light) to 5 (dark).

–

Any one of the alarm indicators 
(

) is lit or blinking.

Please refer to "INDICATOR DISPLAY OF THE MACHINE 
STATUS AND SOLUTION" to check the meaning of the 
alarm indicator and error message, and take appropriate 
actions.

→ Clean them regularly.

→ Use a clean original.

–

→ Make sure that the resolution setting in the scanner driver is 

appropriate for the original.

–

→ If you attempt to scan a large area at high resolution and there is 

insufficient memory in the machine to hold the scanned data, 
please scan at a lower resolution or decrease the scanning area.

–

→ If you are scanning with a TWAIN-compliant application and the 

resulting image has unsuitable brightness or contrast (for 
example, it is too light), click "Colour Adjustment" or "Auto Level" 
to adjust it. Click the "Hue/Saturation/Lightness" in the "Advanced 
setting" to adjust the image while viewing the output image on the 
screen.

–

→ Place the original correctly.