Hitachi VT-F370A 사용자 설명서

 20

Remote Control Buttons 
Remote Control Illustration 

POWER   Turns the VCR on and off. 

VCR1, TV, CATV, VCR2   Device buttons let you set the remote to control one of four devices. 

MUTE (TO CONTROL TV)   Turns off the audio until you press Mute again. 

VOLUME/SLOW   Increase or decrease the audio volume and plays back in adjustable slow motion. 

REW   Rewinds the videotape. 

PLAY   Starts playing a loaded videocassette. 

STOP   Stops a videocassette from playing, recording, pausing, rewinding - or anything it is doing. 

GUIDE   Brings up an on-screen setup and programming guide, the Easy Graphic Menu. 

TAPE SPEED   Switches between standard play (SP) and extended play (EP). 

AVX   Used for recording from an auxiliary input such as a stereo system. 

INDEX   Used for marking and searching for specific tape locations. 

LAST CHANNEL (TO CONTROL TV)   Switches to the channel you watched previously during the current 
viewing session. 

CHANNEL   Top button switches to the next higher channel, bottom button switches to the next lower 
channel. For these to operate, you must have preset your channels. 

REC   Starts recording on the station the VCR is set to. (Press REC and PLAY at the same time.) 

F.FWD   Fast forwards the videotape. 

PAUSE   Temporarily stops the cassette from recording or playing. Press PAUSE again (or PLAY) to 
resume. 

F.ADV   Lets you advance the tape frame by frame. 

CLEAR   Used in on-screen programming and indexing. 

DISPLAY   Used in on-screen programming and indexing. 

TRACKING   Lets you fine tune the picture. 

0 to 9   Number buttons used in on-screen programming. Can also be used to change channels. (Simply 
press 2 or 3 digits for the channel you want - such as 0 and 6 for channel 6, or 100/ENT and 2 and 4 for 
channel 124.) 

VCR/TV   Switches between viewing through the VCR and not viewing through the VCR.