Hitachi VT-FX602S 사용자 설명서

PRESET FOR USE 

- 28 - 

 
 
 
 

5 Begin channel preset 
Press SELECT button once. After scanning, the tuner stops on the lowest 
memorized channel. 

 

Select this feature and the VCR's clock automatically will advance one 
hour in April, then reverse one hour in October. Follow the steps below 
when you want to use this feature even if you set the AUTO CLOCK to 
ON. 

When Daylight-Saving Time is ON, the clock's time will change 
automatically as follows: 
 

NOTES: 
• When programmed timer recordings start between 2:00AM - 2:59AM on the 
First Sunday of April, the VCR will start recording at 3:00AM. 
• When programmed timer recordings end between 2:00AM - 2:59AM on the First 
Sunday of April, the VCR will stop recording at 3:00AM. 

Make sure ... 
• You must use the remote control for the following procedure. 
• VCR power must be turned on. 
• Turn on the TV and set the TV channel to the same video output channel 
as located on the back of the VCR. (CH 3 or 4) 
• Press VCR/TV button on the remote control so that "VCR" appears on 
the display. 

1 Select the main menu 
Press MENU button. 

2 Select "INITIALIZE" 
Press CH/SET 

 or 

 button repeatedly to point to "INITIALIZE". 

Then, press SELECT button. 

 
  MENU 
 
 TIMER 

PROGRAMMING 

 

VCR SET UP 

       

 

INITIALIZE