Hitachi VT-FX602S 사용자 설명서

PLAYBACK 

- 38 - 

 

Make sure... 
• Turn on the TV and set the TV channel to the same video output channel 
as located on the back of the VCR. (CH 3 or 4) 
• Press VCR/TV button on the remote control so that "VCR" appears on 
the display. 

1 Insert a prerecorded tape 
Counter mode appears at counter 0:00:00 on the TV screen. If the erase-
protection tab has been removed, the VCR will start playback 
automatically. 

2 To begin playback 
Press PLAY button. 
If a tape is already in the VCR 
2A) Using button on the VCR 
Just press PLAY button on the VCR. Power will automatically turn on and 
playback will start. (Direct Button Operation) 
2B) Using button on the remote control 
Press POWER button to turn on, and then press PLAY button on the 
remote control. 

3 To stop playback 
Press STOP button. 

This feature is useful in finding or skipping over a particular scene on a 
tape. In this mode, the sound will be muted. 
1) You may view a video tape at a high speed in either a forward or 
reverse direction by pressing F.FWD or REW button. (in the SP/LP/SLP 
modes) 
2) Depress it again, the VCR will now search in super high speed. (in the 
LP / SLP modes) 
3) For normal speed, simply press PLAY button. 

You can view a still picture on the screen during playback (the Still mode). 
Press PAUSE button during playback. "

" appears on the display. Press 

PLAY button to return to playback. 

NOTE: If it is left in the Still mode for more than five minutes, the VCR will