Hitachi VT-FX602S 사용자 설명서
SEARCH
- 45 -
position to forward direction.
1 Select "TIME SEARCH" mode
Press TIME SEARCH button.
Press TIME SEARCH button.
2 Enter your desired time
Press CH/SET
Press CH/SET
or
button repeatedly until your desired time appears.
(Example: "2:50" for 2 hours 50 minutes)
TIME SEARCH
2 : 50
3 Begin Time Search
Press REW or F.FWD button. The VCR begins rewinding or fast
forwarding to the specified point.
The time counts down as the searching progresses.
Press REW or F.FWD button. The VCR begins rewinding or fast
forwarding to the specified point.
The time counts down as the searching progresses.
4 After Time Search
When 0:00 is reached, the VCR will start playback automatically.
When 0:00 is reached, the VCR will start playback automatically.
NOTES:
• Time Search can be set up to 9 hours 59 minutes (9:59).
• This function will not operate in recording mode.
• Procedures must be followed within 30 seconds, from steps [1] to [2]. Otherwise
the Time Search mode will be cancelled.
• Press STOP button to exit the Time Search mode.
• Time Search can be set up to 9 hours 59 minutes (9:59).
• This function will not operate in recording mode.
• Procedures must be followed within 30 seconds, from steps [1] to [2]. Otherwise
the Time Search mode will be cancelled.
• Press STOP button to exit the Time Search mode.
INDEX SEARCH
This feature provides a method of indexing the starting point so that it can
be easily returned to in either fast forward or rewind mode.
• The index mark will be made automatically when the REC button is
pressed. It will also be marked at the starting point of Timer recording and
IRT.
• The index mark is not recorded if the PAUSE button is pressed and
released during recording.
• The time gap between making the index marks on the tape should be
greater than 1 minute for SP recording, 2 minutes for LP recording and 3
minutes for SLP recording.
be easily returned to in either fast forward or rewind mode.
• The index mark will be made automatically when the REC button is
pressed. It will also be marked at the starting point of Timer recording and
IRT.
• The index mark is not recorded if the PAUSE button is pressed and
released during recording.
• The time gap between making the index marks on the tape should be
greater than 1 minute for SP recording, 2 minutes for LP recording and 3
minutes for SLP recording.