Toshiba 160HD4 사용자 설명서
(E) Symbio 160HD4
Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.
15
Deleting, locking, and unlocking
recorded programs in the Modify
Program window
recorded programs in the Modify
Program window
The Symbio AVHD recorder can record a maximum of 300
programs. (The total number will be less than 300 if you record
several long programs or high-definition programs that use up the
160 GB* hard drive capacity). If you attempt to record more than
300 programs, a warning message will display and you will need
to delete some programs before you can begin recording again.
If the Symbio’s hard drive becomes full during recording, it will
start overwriting previously recorded programs that are not
locked. You can lock recorded programs so they are not
accidentally deleted or overwritten.
Note the following:
programs. (The total number will be less than 300 if you record
several long programs or high-definition programs that use up the
160 GB* hard drive capacity). If you attempt to record more than
300 programs, a warning message will display and you will need
to delete some programs before you can begin recording again.
If the Symbio’s hard drive becomes full during recording, it will
start overwriting previously recorded programs that are not
locked. You can lock recorded programs so they are not
accidentally deleted or overwritten.
Note the following:
• If the hard drive becomes full, unlocked programs will
be overwritten during recording.
• If the hard drive becomes full during recording and all
recorded programs are locked (and subsequently cannot
be overwritten), a warning message will display and
recording will stop.
be overwritten), a warning message will display and
recording will stop.
To lock or unlock a recorded program:
1. Press TheaterNet DEVICE to open the TheaterNet Device
Selection window.
2. Press
y or z to highlight the Symbio AVHD and press
ENTER. The TV’s Stream Selection window opens,
displaying a list of all recorded programs for the selected
device (see page 14).
displaying a list of all recorded programs for the selected
device (see page 14).
3. Press
y or z to
highlight the
recording you want
to modify, and
then press INFO
to open the Modify
Program window
(illustrated at
right).
recording you want
to modify, and
then press INFO
to open the Modify
Program window
(illustrated at
right).
4. Press
x or • to
select either
Locked or Unlocked, and then press ENTER.
Locked or Unlocked, and then press ENTER.
To delete a recorded program:
1. Follow steps 1–4 above, and select “Unlocked” in step 4 (if
the program is locked).
2. Press
z to highlight ERASE, and then press ENTER.
Note: You cannot delete a locked program. You must unlock it
before you can delete it.
before you can delete it.
Managing recorded programs
(continued)
Chapter 4: Using the Symbio AVHD recorder
Modify Program window remote control functions
Button
Function
TheaterNet DEVICE Opens the TheaterNet Device Selection
window, from which you can select an
IEEE-1394 device to view. After
selecting a device, the Stream Selection
window opens (see page 14). Highlight
a program and press INFO to open the
Modify Program window for that
program.
IEEE-1394 device to view. After
selecting a device, the Stream Selection
window opens (see page 14). Highlight
a program and press INFO to open the
Modify Program window for that
program.
TheaterNet CTRL
Closes the Modify Program window (if
open) and opens the Stream Selection
window (see page 14).
open) and opens the Stream Selection
window (see page 14).
z
Highlights ERASE (if the program is
unlocked).
unlocked).
y
Highlights the LOCK field.
x •
Locks/unlocks the highlighted program
(if the LOCK field is highlighted).
(if the LOCK field is highlighted).
ENTER
Performs the highlighted operation.
EXIT
Closes the Modify Program window.
_____________
*When referring to hard drive capacity, a gigabyte (GB) means one billion bytes. Not all clusters contained in the 160 GB hard drive are useable for recording
because a portion of the drive space is allotted for directory information.
because a portion of the drive space is allotted for directory information.
Symbio(E)06_A_06-24
10/19/04, 3:02 PM
15