JVC hr-dvs3u 사용자 설명서

다운로드
페이지 88
Masterpage:Right-NoTitle0
EN
 
55
Filename [DVS3U_3-EN.fm]
Page 55
January 10, 2002 10:43 am
Normal Dubbing
(from VHS to DV)
NOTES:
● If you set the dubbing direction incorrectly, you could erase an 
important recording that you wanted to copy. It is 
recommended to conduct a test with unimportant cassettes 
first.
● There may be a discrepancy of several seconds between where 
you intend editing to start, and where it actually starts.
● The superimposed indication during the operation or dubbing 
is not recorded.
● To cancel the dubbing mode, press CH +/– so that the 
dubbing direction indicator (
S-VHS) goes off.
● Before you start dubbing, set “SOUND MODE” to the 
appropriate mode. (
pg. 76)
You can dub selected scenes on a tape, starting and 
stopping wherever you wish.
A
Load cassettes.
For the VHS deck
Insert a VHS (or S-VHS) cassette with the record safety 
tab removed.
For the DV deck
Insert a Mini DV cassette with the erase protection switch 
set to “REC”.
B
Select the dubbing direction.
Press .
● The dubbing direction indicator (
S-VHS) lights.
C
Set the tape speed.
Press DV, then press SP/LP (p).
● “VHS
]
DV” appears on the TV screen if “SUPERIMPOSE” is 
set to “ON”. (
pg. 71)
D
Locate the start point on the VHS deck.
A Press S-VHS.
B Press PLAY (4) to start playback.
C Press PAUSE (9) to pause playback a little before the 
start point.
E
Prepare the DV deck for dubbing.
A Press DV.
B Press and hold PAUSE (9) and press REC (7) so that 
the DV deck enters the Record Pause mode.
● VHS playback indicator and DV recording indicator light.
F
Start dubbing.
Press START.
G
Pause dubbing.
Press START.
● The DV deck enters the Recording Pause mode, then the VHS 
deck enters the Dubbing Pause mode.
H
End dubbing.
Press STOP (8) to stop recording on the DV deck. Then 
press S-VHS and press STOP (8) to stop playback on the 
VHS deck.
1
3
2
1
2
3
4
5
6
7
8
9
0
2
4
1
3
T
W
DV
S-VHS
DVS3U_1-EN.book  Page 55  Thursday, January 10, 2002  10:51 AM