Panasonic DMR-E75V 사용자 설명서

If, at the beginning of a timer program, there is not enough tape 
remaining to complete the recording, the SP/EP function will 
automatically run the tape at EP speed. This ensures that the entire 
program will be recorded. If EP mode is not enough to stretch the 
remaining tape to fit the whole program you will not be able to record 
all of the TV program.

≥It is not possible to automatically activate VP mode.
≥The tape length must be set correctly. (

≥Some tapes may not work correctly.
≥If the tape speed changes from SP to EP during a timer recording, 

some brief picture distortion occurs at that point.

≥Even when the unit is turned off, you can display the timer 

recording list by pressing [PROG/CHECK].

Preparation
≥Press [VHS].

[1]

[2]

3, 4] to select the program.

[3]

¢] to delete,

You cannot delete programs that are currently recording.

The timer recording setting screen appears.

[4]

3, 4, 2, 1] to change and press [ENTER].

[5]

For your reference
≥Programs that failed to record are not deleted from the list 

immediately, but are deleted from the list automatically at 4 a.m. 
two days later.

Timer recording for TV programs cannot be executed on both DVD 
and VHS at the same time.
Make sure the timer recording start times do not overlap on both 
DVD (

l 29) and VHS (l left) timer-programming screens.

When the timer recording settings overlap:
≥When the start time of both timer recordings is the same, the timer 

recording of DVD has priority.

≥When tuner channels are specified in timer recordings on both VHS 

and DVD, only one timer recording can be started.

≥When the interval between the first timer recording and the second 

timer recording on DVD is 1 minute or less as shown below, the 
second timer recording on DVD has priority over the timer 
recording on VHS even if its start time is later than the timer 
recording on VHS.

Timer programming

Video tape

1 minute 

4 CH

10 CH

2 CH

PP-Sample.book  53 ページ  ２００４年４月８日　木曜日　午後３時４５分