Panasonic DMR-E75V 사용자 설명서

다운로드
페이지 84
58
[[DVD/VHS]]
Advanced Operations
[RAM] [DVD-R]
You can transfer (dubbing) programs recorded on a tape onto a disc
° 
with one stroke of the button.
In One-Touch Dubbing, programs are automatically dubbed onto the 
disc from the location of playback on the tape.
° Available discs for transfer (dubbing) from tape are DVD-RAM and 
non-finalized DVD-R.
Preparation
≥Select the unit viewing channel (or the AV input) on the TV.
DVD
≥Release protection (disc 
l 30, cartridge l 18). [RAM]
≥Insert a disc and confirm there is sufficient empty space for 
recording on it. (
≥Select the recording mode.
≥When SAP broadcast program is played back on VHS, the audio 
on DVD is recorded according to the settings in “Select MTS” in the 
initial settings. (
l 44) [DVD-R]
VHS
≥Insert the video cassette containing the program to be copied 
[1]
While both DVD/VHS are stopped, 
Press and hold [
 DVD, DUBBING] for 3 seconds 
or more.
On the main unit, press [
“ DVD].
≥Check if transfer (dubbing) starts properly.
≥The “DUBBING” indicator on the main unit lights.
≥Dubbing is automatically completed when the tape reaches its 
end or the disc becomes full.
∫ To stop transfer (dubbing) halfway through
Press [
∫, STOP].
≥When transfer (dubbing) is completed, a message indicating the 
end of transfer (dubbing) appears on the TV screen and then 
disappears a few seconds later.
∫ When transfer (dubbing) is started, the following 
operations also start automatically
≥“OSD” on VHS MENU  
) “OFF” (l 56)
≥Recording channel indicator on DVD  
) “TP”
≥Output to TV  
) DVD output
Only the following operations are allowed while 
transfer (dubbing)
≥Stopping transfer (dubbing) by pressing [∫, STOP].
Note:
≥While One Touch Transfer (Dubbing) is activated, a timer recording 
cannot be started.
≥When “DVD/VHS Output” is set to “Manual” (
l 43), or when VHS 
output is selected in starting transfer (dubbing), the output is 
switched to DVD automatically at the time when transfer (dubbing) 
is started. 
- When the transfer (dubbing) is already started, you cannot switch 
the output manually.
≥When the transfer (dubbing) is not started or not executed, the 
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is 
properly prepared.
≥When a Copy-guarded tape is inserted, a message appears on the 
display and the recording stops on the spot.
≥If a part of the tape recorded in VP mode is dubbed to disc, noises 
may appear at the beginning of the dubbed part.
Transfer (Dubbing) from VHS
VHS
DVD
PROG/CHECK
DVD REC
VHS REC REC MODE
ADD/DLT
DUBBING
VHS
DVD
TIME SLIP
CHAPTER
 JET REW
STATUS
DISPLAY
DVD ERASE
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
FUNCTIONS
DIRECT NAVIGATOR
TOP MENU
VHS MENU
POWER
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER 
VCR Plus+
OUTPUT
REC MODE
CH, 
WX
µ, DVD REC
 DVD
OPEN/CLOSE
TIME SLIP
REC
CH
/
k1.3
DUBBING
VHS
DVD
DUBBING indicator
∫  One Touch Transfer (Dubbing) (VHS
DVD)
Dividing a title to be dubbed
In One-Touch Transfer (Dubbing) from VHS to DVD, the title is 
divided by index signal detected and then recorded. You can 
search desired titles with Direct Navigator’s Title View (
after transfer (dubbing) to DVD.
≥Titles recorded within 15 minutes (25 minutes in VP mode) of 
each other may not be divided properly.
≥The recording time may become longer than the original title 
depending on the number of index signals.
VHS
DVD
PP-Sample.book  58 ページ  2004年4月8日 木曜日 午後3時45分