EMC CX700 사용자 설명서
8
EMC CLARiiON CX300, CX500, and CX700 Initialization Guide
Setting Up the Service Laptop
15. Click the Networking tab.
PPP: Windows 95/98/NT 4/2000, Internet
should appear in the
Type of dial-up server I am calling
list.
16. Click Settings.
17. Make sure that Enable LCP extensions and Enable software
compression
are checked, then click OK.
18. Highlight Internet Protocol (TCP/IP).
19. Click Properties.
20. Select Obtain an IP address automatically and Obtain DNS
server address automatically.
21. Click Advanced. Make sure that Use IP header compression is
checked. Deselect Use default gateway on remote network.
22. Click OK three times to bring you back to the Connect CX700init
dialog box.
23. Click Cancel to close the Connect CX700init dialog box. You will
enter a user name and password when you initialize the storage
system at the customer site.
system at the customer site.
What Next?
The service laptop is ready to initialize a storage processor at the
customer site. Refer to Initializing the Storage System on page 12.
customer site. Refer to Initializing the Storage System on page 12.