Tyco Electronics P5200 사용자 설명서

108 

The radio display is made up of 3 lines (see Figure 11-4). Lines 1 and 2 contain eight alphanumeric 
character blocks and are used primarily to display system and group names. Line 1 also displays radio 
status messages. The 3rd line is used primarily to display radio status icons. All three lines are used to 
display menu options when in the menu mode. If programmed, the display backlighting will illuminate 
upon power up or when radio controls are operated.  

Status Icons indicate the various operating characteristics of the radio. The icons show operating modes 
and conditions and appear on the third line of the display (see Table 11-3). The battery icon indicates 
approximate level only, based on battery voltage. 

 

– “Busy” transmitting or receiving. 

 

 – Special call mode (telephone). 

 

 – During all radio transmissions. 

 

 – Transmit at low power. 

 – transmit at high power. 

 

 – Battery charge indicator. 

 

 – Low battery indicator. 

 

 – Indicates the current channel is set up as an 

analog channel. 

 

 – Group or channel in scan list. 

 

 – Priority 2 group or channel. 

 

 – Priority 1 group or channel.