Tyco Electronics P5200 사용자 설명서

28 

The P7200 and P5200 display (Figure 8-2) is made up of 3 lines. Lines 1 and 2 contain twelve 
alpha-numeric character blocks each. The 3

rd

 line displays radio status icons. If programmed, the display 

backlighting will illuminate upon power up or when operating radio controls. See the operation sections 
of this manual for specific display characteristics. 

 

Status Icons indicate the various operating characteristics of the radio. The icons show operating modes 
and conditions and appear on the third line of the display (see Table 8-2). The battery charge indicator 
illustrates approximate level only, based on battery voltage. 

 

 – Indicates received signal strength. Appears in the 1

st

 and 2

nd

 positions in 

OpenSky mode. 

 

– Radio is data registered. Appears in the 3

rd

 position in OpenSky mode. 

 

 – Stealth mode is enabled (all tones and display backlight is disabled, voice is still 

heard). Appears in the 4

th

 position in OpenSky mode. 

 

 – Indicates the radio is transmitting or receiving an encrypted voice call.  Appears 

in the 6

th

 position. 

 

Displayed in position 8 on the 3rd line of the display when Scan Mode is Normal or Fixed 
and is not be displayed when the Scan Mode is None. 

 

– Indicates the client is connected to a VTAC. Indicates the 

client is connected to a VTAC. Appears in the 8

th

 position in OpenSky mode. 

 

 – Indicates Selective Call mode. Appears in the 11

th

 position in OpenSky mode. 

 

 – Battery charge indicator. Appears in the 12

th

 position in OpenSky mode. 

 

 – Low battery indicator. Appears in the 12

th

 position in OpenSky mode. 

 

 VTAC Scan icon. Indicates the radio is scanning for a VTAC during XCOV or 

XCOV-TG mode. Once the radio attaches to a VTAC, the radio hides the icon. Appears in 
the 7

th

 position in OpenSky mode. 

 

 Visible when the P7230 model radio is traversing options using 

the 

 and 

 buttons. Appears in the 5

th

 position in OpenSky mode.