Tyco Electronics P5200 사용자 설명서

43 

 

.  

Full communications (listen and talk) with the active talk group. 
No calls received from other talk groups. 

 

The user can scan all talk groups in the active profile that are not locked out as long as there 
is demand on the site. 
Priority (P1 and P2) groups are user selectable. 
Receive calls from more than one talk group, if available from the current site. 
Allows dragging of the selected talk group, P1, P2, and default emergency talk groups to the 
site on which the radio is registered. (If other calls are available at the site, they also can be 
heard but they will not be actively dragged.) 

The default emergency talk group, as well as any emergency-enabled talk groups, is only 
dragged if it is in emergency mode. 

Functions the same as Normal Scan Mode, except the priority groups are fixed to the 
selected profile’s pre-defined P1 and P2 groups (configured via the UAS). In this mode, P1 
and P2 groups CANNOT be locked out. 

The scanning mode choice remains in effect until it is changed. Even if the radio is turned off, the current 
scanning mode selection is saved for the next use. 

P7250 and P7270 Model Radios: 

1.  Press the 

 or 

 buttons until “ScnModeMenu” appears in the display. 

2.  Use the 

 or 

 keys to scroll through the list of modes until your choice appears; Normal, None, or 

Fixed. 

3.  Press the 

 key to activate the scan mode selection and return to the dwell display. 

P7270 Model Radios Only: 

Press 3# to toggle Scan Mode On/Off. 

•  If the Scan Mode is Normal when the Scan Mode is toggled Off, the Scan Mode will be Normal when 

toggled On again. 

•  If the Scan Mode is Fixed when the Scan Mode is toggled Off, the Scan Mode will be fixed when 

scan mode is toggled On again. 

•  If the Scan Mode is Off when the radio boots up, the Scan Mode will be Normal when Scan Mode is 

toggled On. 

Scanning Mode selections survive power down. At startup, the radio defaults to the scanning mode of set 
during last use. The last selection made remains in effect until a new selection is made from the Scan 
Mode menu.