Tyco Electronics P5200 사용자 설명서
MM23772, Rev. F
55
8.31.5
Use the Scene-of-Incident Mode
The Scene-of-Incident mode (SOI) is user-selectable. The SOI mode provides a local repeater function
(V-TAC) with no network connection
(V-TAC) with no network connection
CAUTION
When operating in the SOI mode, the radio is disconnected from the OpenSky network.
Therefore, communications with radios and dispatch personnel on the network is not
possible.
Therefore, communications with radios and dispatch personnel on the network is not
possible.
Enter SOI Mode (P7270 Only):
1. Press *4#.
2. The radio prompts for the channel. Enter the channel number and press # to confirm channel.
3. The radio prompts for the band. Table 8-11 lists valid bands and their definitions. Enter the number
assigned for the desired frequency band and press # to confirm.
4. The radio reverts to the dwell display.
If accepted, you will be switched off the network, and be communicating locally through the V-TAC.
Press *40# or use the Client Mode menu to return to normal operation (Network Mode). The personality
and profile in use at the time the radio entered SOI mode is restored.
and profile in use at the time the radio entered SOI mode is restored.
Enter SOI Mode (P7250 and P7270) Manually Entering the Channel:
1. Press
or
until the Client Mode menu appears.
2. Press
or
until SOI is displayed.
3. Press
to confirm mode selection.
4. Press
or
until “Manual Select Chan” is displayed and press
.
5. Press
or
to edit the right-most digit and press
to advance to the next digit. Repeat until the
desired channel is entered.
6. The radio then prompts the user to edit the band. Table 8-11 lists valid bands and their definitions.
Press
or
to edit the number assigned to the frequency band and press
to confirm and enter
the SOI mode.
Use the Client Mode menu to return to normal operation (Network Mode). The personality and profile in
use at the time the radio entered SOI mode is restored.
use at the time the radio entered SOI mode is restored.
Enter SOI Mode (P7250 and P7270) Selecting Pre-Programmed Channel:
1. Press
or
until the Client Mode menu appears.
2. Press
or
until SOI is displayed.
3. Press
to confirm mode selection.
4. Press
or
scroll through a list of pre-programmed channels.
5. Press
to confirm channel and enter SOI mode.
Use the Client Mode menu to return to normal operation (Network Mode). The personality and profile in
use at the time the radio entered SOI mode is restored.
use at the time the radio entered SOI mode is restored.