Tyco Electronics P5200 사용자 설명서

66 

METHOD 2:  

(P7270, P7250, and P5250 model radios) From keypad: If group selection is 

programmed as the primary function of 

 and 

 select a group by pressing

 or 

 to scroll through the group list. The display registers the new group

name on line two.  

METHOD 3:  

(P7270 model radios) Direct Access: Press 

 to enter the group select mode. 

Press the numeric key mapped to the desired group. Press 

. The radio will 

move to the selected group.  

METHOD 4: 

(P7230 model radios only) If programmed for groups, press the 

 button to 

change groups. The display registers the new group name on line two. If

programmed for channels, press the 

 button to change the channel. The 

display registers the new channel. 

1.  Press 

 to toggle scan OFF and verify   is not displayed. 

2.  Select group or channel. 

3.  Press 

 once to remove group or channel from list. 

4.  Press 

 once to add as a normal group or channel. 

5.  Press 

 twice to add as a Priority 2 group. 

6.  Press 

 three times to add as a Priority 1 group. 

7.  Press 

 to re-start scanning. 

1.  Press 

 to toggle scan OFF and verify   is not displayed. 

2.  Select group or channel. 

3.  Press 

 once to remove group or channel from the list. 

4.  Press 

 once to add as a normal group or channel. 

5.  Press 

 twice to add as a Priority 2 group. 

6.  Press 

 three times to add as a Priority 1 group. 

7.  Press 

 to re-start scanning.