Sony D-NS707F 매뉴얼
Presetting stations
manually
1
Press RADIO ON/BAND to turn on the
radio.
2
Press RADIO ON/BAND to select the
band.
3
Press and hold MEMORY until the preset
number flashes in the display.
FM01
87.50 MHz
From this step on, start the next operation
within 30 seconds after you finished the
previous operation. If 30 seconds pass
with nothing done, the preset number
stops flashing which shows that the CD
player has exited the preset memory
standby mode. If this happens, start from
step 3 again.
within 30 seconds after you finished the
previous operation. If 30 seconds pass
with nothing done, the preset number
stops flashing which shows that the CD
player has exited the preset memory
standby mode. If this happens, start from
step 3 again.
4
Flick the lever toward
/PRESET – or
/PRESET + repeatedly to select
the preset number you want to store the
station on while the preset number flashes.
station on while the preset number flashes.
5
Press TUNE
or
to tune in the
station you want while the preset number
flashes.
flashes.
6
Press DISPLAY/MENU.
When the station is preset successfully,
the beep sounds. The new station replaces
the old one.
The preset number increases by one and
the CD player enters the preset memory
standby mode.
the beep sounds. The new station replaces
the old one.
The preset number increases by one and
the CD player enters the preset memory
standby mode.
7
Repeat steps 4 to 6 when you preset the
stations in the same band. When you
preset the stations in the different band,
press and hold MEMORY to exit the
preset memory standby mode. Repeat
steps 2 to 6 after the preset number stops
flashing.
preset the stations in the different band,
press and hold MEMORY to exit the
preset memory standby mode. Repeat
steps 2 to 6 after the preset number stops
flashing.
To exit the preset memory standby mode
When the radio is turned on, you can exit
the preset memory standby mode using one
of the following procedures. Preset stations,
however, will remain stored in the CD
player’s memory.
• Hold down MEMORY until the preset
the preset memory standby mode using one
of the following procedures. Preset stations,
however, will remain stored in the CD
player’s memory.
• Hold down MEMORY until the preset
number stops flashing.
• Do not press any button for 30 seconds. The
preset number stops flashing.
• Press
/ENTER. The CD player enters
the CD playing mode.
• Press
•RADIO OFF. The radio is turned
off.
To cancel all preset stations
1
While the radio is turned off and CD play
is stopped, press and hold DISPLAY/
MENU until the MENU screen appears.
MENU until the MENU screen appears.
2
Flick the lever toward
or
to
select “OPTION,” then press
/ENTER.
3
Flick the lever toward
or
to
select “TU PRESET,” then press
/
ENTER to enter the selection.
“Clear?” appears in the display. When you
press
“Clear?” appears in the display. When you
press
/ENTER, all the preset stations
are canceled.
D-NS707F.US.3-267-208-11(1)
24
GB
Using the Radio
D-NS707F.US.3-267-208-11(1)
25
GB