JVC XL-MC222BK 사용자 설명서

Check that the standby indicator on the control panel is lighted.
Then press the POWER button either on the control panel or remote
control.

3. Place the disc in a slot, with its label facing to the left.

POWER

STANDBY

PLAY/PAUSE

STOP/CLEAR

REPEAT

PLAY MODE

MEMORY

DISC/TRACK

EXCHANGE

RANDOM

INTRO

CALL

CANCEL

TRACK

OPEN/CLOSE

DISC

DOWN

DISC EJECT

ENHANCED COMPULINK CONTROL SYSTEM

'

CD Label

• Do not put anything except CDs in the storage area.
• 8 cm CDs cannot be played back in this unit.
• Be careful not to touch the playback mechanism in the
  unit.
• Up to 25 discs can be accessed at one time.  Trying to
  insert or remove a disc which is not in the loading area
  may result in damage to the discs and unit.
• The disc needs to be placed vertically in the storage slot
  of this component. After taking the disc out of its case,
  grip the rim of the disc between your thumb and middle
  finger — be sure to keep the fingers on the narrow, outer-
  most strip where the surface is solidly bright.
• Do not try to put more than one disc in a single slot.  The
  unit will be damaged.

4. Repeat step 3, or steps 2 and 3, to load discs in the storage. Up

to 200 discs can be loaded.

5. When all necessary discs have been loaded, press the OPEN/

CLOSE button to close the storage door.  “d-CL” is shown in
the display.

Make sure to remove your hand from the storage opening
before pressing the OPEN/CLOSE button.

1. Press the OPEN/CLOSE button to eject a disc in the playback

position for unloading or changing.

2. To unload or change discs in other slots, press the DISC button

and specify the slot number using the jog dial. The specified
disc will be brought to the load/unload position. Then press the
DISC EJECT button to raise the disc up.

Repeat this step to unload or change any additional discs.

3. When unloading or changing is completed, press the OPEN/

CLOSE button to close the door. The disc in the load/unload
position at this time will then be shifted to the play position.

POWER

STANDBY

POWER

or

(Remote control)

To turn the power off, press the button again lighting the standby
indicator.

NOTE: Keeping the unit in the standby state consumes a mini-

mal 6.5 watts. If necessary, unplug the power cord
from the wall socket to turn off the power completely.

Also see Page 12 for the manner of handling and taking care of
compact discs.

1. Press the OPEN/CLOSE button either on the control panel or

remote control, opening the disc storage door and exposing
carousel slots.  “d-OP” is shown in the display.

OPEN/CLOSE

OPEN/

CLOSE

or

(Remote control)

2. To select a specific slot to load a disc, press the DISC button

and turn the DISC/TRACK jog dial, to specify the required
slot number, which is shown as “DISC” number on the display.
The carousel rotates to bring the specified slot to the load/unload
position, which is in the center of the storage area.

DISC

XL-MC222/E B

97.7.15, 5:58 PM

6