Insignia NS-B4111 사용자 설명서

다운로드
페이지 2
Read these instructions carefully before using this product, and retain 
them in a safe place for reference. 
Features
Top
 
1
Handle
5
Function (RADIO/CD/AUX)
2
CD door
6
Power (ON/OFF)
3
Volume control
7
Tuning control
FM antenna
8
CD door open (push tab)
Back
1.5V x 8 UM 2 or
“C” size or LR14
+
- +
-
+
-
+
-
+
-
+
-
+
- +
-
1
AUX IN jack
2
Battery compartment
3
AC input
Quick Installation Guide
NS-B4111 CD Boombox
Front
1
Speaker
8
Speaker
2
CD play/pause button
9
Time set button
3
CD stop button
10 Display button
CD skip next button
11 Repeat button
5
CD track display
12 Random button
6
CD skip previous button
13 Standby button
7 AM/FM 
button
Setting up your CD player
Connecting AC power
1  Connect the provided AC power cord to the AC input socket on 
  the CD player.
2  Plug the cord into a household AC power socket.
Installing batteries
1  Insert eight C alkaline batteries (not included) into the battery 
  compartment as indicated by the diagram within the 
 compartment.
2  Securely close the battery compartment cover.
Notes: Battery power is used only when AC power is disconnected.
Replace all batteries at the same time with the same battery type. 
Do not mix battery types.
When CD player is stored unused for a long time, remove the 
batteries to prevent damage.
Setting the clock
1 Turn off  your CD player, then press 
  TIME SET. The hour digits fl ash. Set 
  time under Standby mode.
2 Press 
 or 
 to adjust the hour, 
 then 
press 
TIME SET. The minute 
 digits 
fl ash.
3 Press   or 
 to adjust the minute, 
 then 
press 
TIME SET. The clock is set.
4  To view the clock, turn on your CD 
  player, then press DISPLAY.
NOTE: While the boombox is in standby mode running on battery 
power, your batteries will continue to slowly drain, although 
the clock’s time will be saved. To prevent battery drain, turn the 
boombox completely off  by sliding the power switch (although 
your clock setting will be lost).
Using your CD player
Warning: Use of any controls, adjustments, or procedures other 
than those specifi ed herein may result in hazardous radiation 
exposure.
Using the radio
1
 
Slide the FUNCTION selector to RADIO, then press AM/FM to 
 select 
AM or FM mode.
2 Turn the TUNING control until you locate the station you want. 
  If you tune to an FM station broadcasting in stereo, the stereo 
  indicator turns on. “ST” will appear in the upper-right of the LCD 
  screen when stereo is on.
For optimum FM reception, make sure that the FM 
(telescopic) antenna is fully extended and vertical.
For optimum AM reception, rotate the CD player to orient its 
built-in antenna until you get the strongest signal. 
Using the CD player
The CD player can play standard audio CDs and audio CDs created 
on a computer’s CD-R/CD-RW drive.
1  Slide the FUNCTION selector to CD, then lift the CD door and 
  insert a CD with the label facing up. Make sure that the CD is 
  correctly mounted on the spindle and locked in place.
NS-B4111_09-0103_QSG_V2_EN.indd   1
NS-B4111_09-0103_QSG_V2_EN.indd   1
3/4/2009   7:57:12 PM
3/4/2009   7:57:12 PM