Daewoo DCI-27 사용자 설명서

다운로드
페이지 17
2. IPHONE:
 In TUNER status, press FUNCTION key to switch over to IPHONE status. Then insert IPHONE/IPOD 
unit to IPOD port and start to play IPHONE/IPOD music.  (After the main unit is connected to power supply, you can 
charge the IPOD/IPHONE in any state). 
Pause  Function:
  In  IPHONE/IPOD  Play  or  Pause  status,  press          key  once  to  pause  playing.  (Note:  In 
IPHONE/IPOD Play or Pause status, LCD 
won
't display       , and they only display on LCD of IPHONE/IPOD). 
Up and Down Music Selection Function:
 In IPHONE/IPOD play or pause status, press       /      to call 
out Previous Music/ Next Music.
Forward & Reward Function:
 In IPHONE/IPOD Play or Pause status, press       /       key for a longer time 
to call out Forward & Reward Function.
IPHONE Incoming Caller Display Function:
 When there is an incoming call as IPHONE is playing 
music, this unit will automatically switch over to caller ring tone and stop playing music.
3. AUX:
 In IPHONE status, press FUNCTION key to switch over to AUX status, just insert the external sound source 
like MP3/CD, etc. into AUX port on the back of unit and start to enjoy the music inputted by AUX (please adjust the 
volume of external sound source to the medium level and put it in PLAY status).  
Volume Adjustment:
 Volume may be tuned up or down between 00 and 30.
Memory  Function:
  Open  the  battery  door  on  the  back  of  unit  and  load  Four AA        batteries  into  the  little 
battery holder according to the positive and negative polarities.
 NOTE: The battery is only for the backup of the clock and alarm function.
Clock Settings:
 In Standby status, press MEM/SET key for a longer time to enter into Clock Settings status, 
then  the  clock  will  be  displayed  and  numbers  on  LCD  light  will  flash.  HOUR  figures  on  LCD  start  to  flash,  you  can 
press  Previous  Music/  Next  Music  key  to  adjust  the  hour;  press  MEM/SET  key  again,  HOUR  figures  on  LCD  will  be 
displayed stably and MINUTE figures start to flash, you can press      and      keys to adjust the minute and finally press 
MEM/SET key once to confirm the settings and exit from the clock status. 
Alarm Clock Settings:
 Press POWER key to power off and enter into standby status, press SLEEP/AL key 
for a longer time, and HOUR figures on LCD will flash; then Previous Music/Next Music key to adjust the HOUR
 
press SLEEP/AL key once and HOUR figures on LCD will be displayed stably and MINUTE figures start to flash, you 
can press Previous Music/ Next Music key to adjust the minute and finally press SLEEP/AL key once and the alarm 
clock mode starts to flash, press      and      keys to set up the alarm clock mode as one of ring tone, radio, IPOD/ 
IPHONE modes and finally press SLEEP/AL key to complete the settings. 
Snooze function:
 After the alarm clock has rung, press SNOOZE key to activate the snooze function.The 
alarm ring will pause and will ring alarm nine minutes later. You can then press POWER key to stop the alarm bell and 
not resume it. 
Sleep Settings:
 In the play/ pause/ stop status of arbitrary function, press SLEEP key shortly on the unit to 
set the sleep time as SLEEP120 / SLEEP90 / SLEEP60 / SLEEP30 / SLEEP15 / SLEEPOFF as you desire. 
17
16
EN
EN