Lg Electronics 3828EL3010Y 사용자 설명서

If you would like to change the settings  

for that cycle, press the option button(s)  

to display additional settings for that option. 

Press the button again to cycle through  

the settings until the desired setting is  

highlighted. 

NOTE: To protect your garments, not every 

dry level, temperature, or option is available 

with every cycle.

Turn the cycle selector knob to the desired 

cycle. The display will show  

the preset Dry Level,  

Temperature, Time, and  

Option settings for that cycle. 

Select any additional cycle options, such  

as CUSTOM PROGRAM,  

WRINKLE CARE, RACK DRY, 

DAMP DRY BEEP and *ChILD 

LOCK by pressing the button 

for that option.

Press the ON/OFF button to turn on the 

dryer. The lights around the cycle 

selector knob will illuminate.

Press the START/PAUSE button to begin the 

cycle. The display will change, 

and the dryer will display the 

estimated (SENSOR DRY) or set 

time (MANUAL DRY) remaining 

and start tumbling. To pause the cycle at any 

time, open the dryer door or press PAUSE. 

To resume the cycle where it was stopped, 

press START/PAUSE again. 
NOTE: If the dryer has been stopped for 

more than 8 minutes, the dryer will turn  

off automatically. 

Once you have loaded the dryer:

When the load is finished, the beeper (if set) 

will sound. If you have set the WRINKLE 

CARE option, the dryer will tumble the load 

periodically for up to 3 hours.

To prevent wrinkling, remove items from the 

dryer immediately after the end of the cycle.

Always clean the lint filter after every cycle. 

To clean, pull the lint filter straight up and 

roll any lint off the filter with your fingers.  

Do not rinse or wash the filter to remove lint. 

Push the lint filter firmly back into place.

2