Lg Electronics 3828EL3004T 사용자 설명서

•  Store and install the dryer where it will not be 

exposed to temperatures below freezing or 

exposed to outdoor weather conditions.

•  Choose a location with a solid, level floor. 
•  If the dryer is being installed in a garage,  

place the dryer at least 18 in. (46 cm) above  

the floor.  

•  Most installations require a minimum 5½ in.  

(14 cm) clearance behind the dryer for the 

exhaust ducting.

•  Allow minimum clearances of at least 1 in.  

(2.5 cm) on the sides and back to minimize 

vibration and noise. 

•  Allowing additional clearance for installation and 

servicing is recommended. 

•  Be sure to allow for wall, door, or floor moldings 

that may increase the required clearances. 

•  Allow at least 24 in. (61 cm) in front of the dryer 

to open the door. 

It is important that you review this entire manual before installing and using your dryer. Detailed instructions 

concerning electrical connections, gas connections, and exhaust requirements are provided on the  

following pages.

•  Properly ground dryer to conform with all 

governing codes and ordinances. 

•  To reduce the risk of electric shock, do not 

install the dryer in damp or wet locations.

•  If you are installing your dryer in a manufactured 

or mobile home, please refer to the section 

Mobile Homes.

Additional Instructions for closet installations:
•  The closet door must allow for sufficient airflow. 

Refer to the diagram above for minimum vent 

opening requirements. A louvered door is also 

acceptable.

•  Make sure that there is at least 18 in. (46 cm) of 

clearance above the dryer. 

24 in.

2

(155 cm

2

)

3"

(7.6 cm)

3"

(7.6 cm)

48 in.

2

(310 cm

2

)

Closet Door Vent 

Requirements