Clarity INT9 사용자 설명서
Clarity - INT9 A/D converter
Installation
6
2 Installation
Ensure that you have Administrator access
rights to your Windows OS before you proceed
with the installation.
2.1 The INT9 Card
• Install Clarity software from the CDROM.
Caution!
Install the Clarity software before inputting any
devices.
• Plug in the HW Key (described in the Getting
Started manual)
• Turn off the PC
• Plug the INT9 card into the PCI slot
• Start the PC
• Plug the INT9 card into the PCI slot
• Start the PC
a) MS Windows 2000/XP/Vista and later
In Windows 2000/XP/Vista the drivers were
In Windows 2000/XP/Vista the drivers were
installed automatically during the installation
of the Clarity software.
b) Previous versions of MS Windows
In systems other than Windows 2000/XP/
b) Previous versions of MS Windows
In systems other than Windows 2000/XP/
Vista follow the procedure described in chapter
4.3 on pg. 23.
• The driver is now installed, proceed to setup
and wiring.
Note:
When installing multiple INT9 cards, a PC restart is
recommended, after the installation, in order to
prevent the reassignment of INT9 acquisition
channels between Clarity
Instruments
.
2.2 Standard cable for Clarity station
The standard Clarity station package includes
a cable set composed of signal and starting
cables for connecting the CLARITY station to
the chromatograph.
• Signal cables
Labelled “DET1” to “DET4” (according to the
number of channels), the cables are supplied
as standard without connectors [bare stripped