Sony UP-DF500 사용자 설명서
A
d
jus
tment
tment
Menu Operation
19
3
Display the selected number by pressing the
G
or
g button.
To reset to the default setting of the high
tone range
tone range
Display 75.
Selecting a Gamma Curve
When the gamma curve is not specified at the modality
side, select the gamma curve to be used at the unit.
side, select the gamma curve to be used at the unit.
1
Press the MENU button.
2
Display the GAMMA SEL menu by pressing the
F
or
f button, then press the g button.
The unit enters the gamma selecting mode.
3
Select the desired gamma curve by pressing the
G
or
g button.
The gamma curves for SONY 1 to SONY 5 have
been pre-set, you cannot change these settings.
The gamma curves for USER 6 to USER 10 can be
set to the desired value. For advice on the settings,
contact your nearest Sony dealer.
been pre-set, you cannot change these settings.
The gamma curves for USER 6 to USER 10 can be
set to the desired value. For advice on the settings,
contact your nearest Sony dealer.
Gamma curve
The gamma curves of SONY 1 to SONY 5 are
shown below.
shown below.
Display the selected number.
3
1
2
4
Gamma curve
Meaning
SONY 1
Default setting
SONY 2
The half tone is darker compared to
SONY 1
SONY 1
SONY 3
The half tone is lighter compared to
SONY 1
SONY 1
SONY 4
The half tone is smoother compared to
SONY 1
SONY 1
SONY 5
The half tone is sharper compared to
SONY 1
SONY 1
USER 6 to 10
Not preset. For advice on settings,
contact your nearest Sony dealer. If
you select these gamma curves,
USER 6 to 10 before setting, same
setting as the one of SONY 1 is
applied.
contact your nearest Sony dealer. If
you select these gamma curves,
USER 6 to 10 before setting, same
setting as the one of SONY 1 is
applied.
Light
Input data
Dark
Printout
Light
Dark