Fujifilm 120 사용자 설명서

To prepare to use your camera, first press the power supply button to turn on the

power. Pressing the button once more turns the power off.

∗

When you turn your camera on, the lens cover will open and the initial display will appear in the

LCD.

∗

When you are finished using your camera, turn the power off to conserve your battery. If the

power supply is left on for more than seven minutes without the camera being used, the camera

will automatically turn itself off.

Before you turn the camera on, make sure that the lens is not blocked to avoid any interference

with the lens extending into its picture taking position.

1

2

3

To determine the condition of the battery in your camera, turn it on and check the

battery capacity indicator on the LCD panel.

1

on

: Battery capacity is OK.

2

on

: Battery capacity is low. Replace with a new battery.

3

blink

: Shutter cannot be released because battery is exhausted. Replace with a fresh battery.

∗

Check the battery capacity before you start to use your camera.

∗

You can replace your battery even if you have film in your camera.