Canon 3818B001 사용자 설명서
177
By connecting the camera to a computer, you can transfer images from
the camera’s card by operating the camera. This is called direct image
transfer.
the camera’s card by operating the camera. This is called direct image
transfer.
Before connecting the camera to a computer, be sure to install
the provided software (EOS DIGITAL Solution Disk on CD-
ROM) in the computer.
For instructions to install the provided software, see the separate
sheet, CD-ROM Guide.
the provided software (EOS DIGITAL Solution Disk on CD-
ROM) in the computer.
For instructions to install the provided software, see the separate
sheet, CD-ROM Guide.
1
Set the camera’s power switch to
<2>.
<2>.
2
Set the shooting mode to any
mode except <k>.
mode except <k>.
3
Connect the camera to the
computer.
computer.
Use the interface cable provided with
the camera.
the camera.
When connecting the cable plug to
the camera’s <q/C>
terminal, the cable plug’s <D> icon
must face the front side of the
camera.
the camera’s <q/C>
terminal, the cable plug’s <D> icon
must face the front side of the
camera.
Connect the plug on the other end of
the cable to the computer’s USB port.
the cable to the computer’s USB port.
d
Transferring Images to a Computer
Preparation for Image Transfer