JVC GZ-MG50E 사용자 설명서

다운로드
페이지 101
24 
EN
VIDEO RECORDING & PLAYBACK
MasterPage: Body_Left
1
Set the power switch to 
.
2
Set the MODE switch to 
.
● The index screen for videos appears. The image 
on the index screen shows the first part of the 
shooting.
● If the power is turned off while video playback is 
paused, the camera memorizes the scene where 
the video was stopped. In this case, the stopped 
scene is displayed when the power is turned back 
on again.
● To switch the medium to be played back, see pages 
3
Press 
/
/
/
 to select the video file 
you want to play back.
4
Press 49 to start playback.
5
To pause playback, press 49 again.
To return to the index screen
Slide the zoom lever to W when playback is 
paused.
To adjust the speaker volume
During playback slide the zoom lever towards T 
to turn up the volume, or towards W to turn down 
the volume.
To turn on/off the date display
Set [DATE/TIME] to [ON], [AUTO] or [OFF]. 
(
To turn on/off the on-screen display
Press INFO/
 repeatedly. 
To check the file information
Press INFO/
 when playback is paused. 
To play back files in the [EXTMOV] folder
If the data cannot be recorded properly, the 
video files are saved to the [EXTMOV] folder. 
(
To play back the files in the [EXTMOV] folder, 
press the recording start/stop button or START/
STOP button on the remote control while the 
index screen is displayed in step 
2, and then 
proceed to step 
3 after [MPG] is displayed.
To return to the index screen, press the 
recording start/stop button or START/STOP 
button on the remote control again.
● The file information and playlist creation functions 
are not available for files in the [EXTMOV] folder.
NOTES:
● The playback picture can be viewed in the LCD 
monitor or on a connected TV. (
● At the junctions between scenes, the image may 
stop momentarily or the sound may be 
interrupted. However, this is not a malfunction.
● The date and counter can be displayed during 
playback. (
● When the camera heats up, the U indicator 
flashes. If the camera continues to heat up, 
playback may be stopped to protect the recording 
medium. In this case, turn off the camera power, 
and then wait until the camera cools down. 
(
● When a cable is connected to the AV connector, 
the sound is not heard from the speaker.
Video Playback
Power Switch
Lock Button
49
Zoom Lever
INFO/
MODE
Speaker
M5E3PAL.book  Page 24  Tuesday, August 2, 2005  4:04 PM