JVC LYT1145-001A 지침 매뉴얼
EN
24
Fade/Wipe Effects
These effects let you make pro-style scene transitions.
Use them to spice up the transition from one scene to
the next.
Use them to spice up the transition from one scene to
the next.
Fade or Wipe works when tape recording is started or
when you stop recording.
when you stop recording.
1
Set the VIDEO/MEMORY Switch
4
to “VIDEO”,
then set the Power Switch
u
to “
” while pressing
down the Lock Button
y
located on the switch. Open
the LCD monitor fully or pull out the viewfinder fully.
2
Press the MENU/VOLUME wheel
%
in. The Menu
Screen appears.
3
Rotate the MENU/VOLUME wheel
%
to select
“
WIPE/FADER”, then press it.
4
Rotate the MENU/VOLUME wheel
%
to select the
desired function, then press it. Selection is complete.
Press the MENU/VOLUME wheel
Press the MENU/VOLUME wheel
%
in again.
• The WIPE/FADER Menu disappears and the effect is
reserved. The indicator representing the selected
effect appears.
effect appears.
5
Press the Recording Start/Stop Button
e
to activate
the Fade-in/out or Wipe-in/out.
To Deactivate The Selected Effect . . .
..... select “OFF” in step 4.
IMPORTANT
Some Fade/Wipe Effects cannot be used with certain
modes of Programme AE with special effects (
modes of Programme AE with special effects (
墌
pg.
23). If an unusable Fade/Wipe Effect is selected, its
indicator blinks or goes out.
indicator blinks or goes out.
NOTE:
You can extend the length of a Fade or Wipe by pressing
and holding the Recording Start/Stop Button
and holding the Recording Start/Stop Button
e
.
FADER — WHITE
Fade in or out with a white screen.
FADER — BLACK
Fade in or out with a black screen.
FADER — B.W
Fade in to a colour screen from a black and white
screen, or fade out from colour to black and white.
screen, or fade out from colour to black and white.
WIPE — CORNER
Wipe in on a black screen from the upper right to the
lower left corner, or wipe out from lower left to upper
right, leaving a black screen.
lower left corner, or wipe out from lower left to upper
right, leaving a black screen.
WIPE — WINDOW
The scene starts in the centre of a black screen and
wipes in toward the corners, or comes in from the
corners, gradually wiping out to the centre.
wipes in toward the corners, or comes in from the
corners, gradually wiping out to the centre.
WIPE — SLIDE
Wipe in from right to left, or wipe out from left to right.
WIPE — DOOR
Wipe in as the two halves of a black screen open to the
left and right, revealing the scene, or wipe out and the
black screen reappears from left and right to cover the
scene.
left and right, revealing the scene, or wipe out and the
black screen reappears from left and right to cover the
scene.
WIPE — SCROLL
The scene wipes in from the bottom to the top of a
black screen, or wipes out from top to bottom, leaving a
black screen.
black screen, or wipes out from top to bottom, leaving a
black screen.
WIPE — SHUTTER
Wipe in from the centre of a black screen toward the
top and bottom, or wipe out from the top and bottom
toward the centre leaving a black screen.
top and bottom, or wipe out from the top and bottom
toward the centre leaving a black screen.
FOR RECORDING
y
e
%
u
^
01 GR-D70/60EK 23-34
02.12.4, 17:17
24