JVC LYT1325-001A 지침 매뉴얼

다운로드
페이지 56
FEATURES FOR RECORDING
38 
EN
MasterPage: Left
1
Set the Power Switch to “M”.
2
Set “r” to the desired mode. (
● The PROGRAM AE menu disappears and the selected 
effect is activated.
● The selected effect indicator appears.
To deactivate the selected effect
Select “OFF” in step 
2. The effect indicator disappears.
NOTES:
● Program AE with special effects can be changed during 
recording or during Record-Standby.
● Some modes of Program AE with special effects cannot be 
used during Night-Scope.
● When a subject is too bright or reflective, a vertical streak 
may appear (smear phenomenon). Smear phenomenon 
tends to occur when “SPORTS” or any mode of “SHUTTER 
1/250 – 1/4000” is selected.
● Some modes of Program AE with special effects cannot be 
used with certain Wipe/Fader effects. (
case, the selected indicator blinks or goes out.
PROGRAM AE
OFF: Disables the function. (Factory-preset)
 SHUTTER 1/50: The shutter speed is fixed at 1/50th 
of a second. Black bands that usually appear when 
shooting a TV screen become narrower.
 SHUTTER 1/120: The shutter speed is fixed at 
1/120th of a second. The flickering that occurs when 
shooting under a fluorescent light or mercury-vapour 
lamp is reduced.
SHUTTER 1/250SHUTTER 1/500SHUTTER 1/1000*/ 
SHUTTER 1/2000*/ SHUTTER 1/4000*: These settings 
allow fast-moving images to be captured one frame at a 
time, for vivid, stable slow-motion playback by fixing 
shutter speed variables. Use these settings when an 
automatic adjustment does not work well, using SPORTS 
mode. The faster the shutter speed, the darker the 
picture becomes. Use the shutter function under good 
lighting conditions.
 SPORTS
(Variable Shutter Speed: 1/250 – 1/4000):
This setting allows fast-moving images to be captured 
one frame at a time, for vivid, stable slow-motion 
playback. The faster the shutter speed, the darker the 
picture becomes. Use the shutter function under good 
lighting conditions.
 SNOW: Compensates for subjects that may 
otherwise appear too dark when shooting in extremely 
bright surroundings such as in the snow.
 SPOTLIGHT: Compensates for subjects that may 
otherwise appear too bright when shooting under 
extremely strong direct lighting such as spotlights.
 TWILIGHT: Makes evening scenes look more 
natural. White Balance (
墌 pg. 37) is automatically set to 
”, but can be changed to your desired setting. When 
Twilight is chosen, the camcorder automatically adjusts 
the focus from approx. 10 m to infinity. From less than 10 
m, adjust the focus manually. The flash does not fire in 
this mode.
 SEPIA: Recorded scenes have a brownish tint like 
old photos. Combine this with the Cinema mode for a 
classic look.
 MONOTONE: Like classic black and white films, 
your footage is shot in B/W. Used together with the 
Cinema mode, it enhances the “classic film” effect.
 CLASSIC FILM*: Gives recorded scenes a strobe 
effect.
 STROBE*: Your recording looks like a series of 
consecutive snapshots.
* Available only when the VIDEO/MEMORY Switch is set to 
“VIDEO”. 
The Navigation Function helps you check tape contents 
by making thumbnail images on a memory card.
Before continuing
To use Navigation functions, load a cassette and memory 
card, then set the VIDEO/MEMORY Switch to “VIDEO”.
To make thumbnail images during video recording 
automatically
1
Set “NAVIGATION” to the desired navigation storing 
time. (
● If the “
” indicator appears blinking on the screen, wait 
until it stops blinking. If it does not stop blinking after a 
while, check if a memory card is loaded.
2
Set the Power Switch to “A” or “M”.
3
Press the Recording Start/Stop Button to start 
recording.
● When the recording time is over the navigation time set in 
step 
1, “
” appears briefly, then the image of the point 
where recording is started is captured and stored in the 
memory card as a thumbnail image.
● If the Recording Start/Stop button is pressed before “
” 
stops blinking, the image of the point where the loaded 
memory card is recognised is captured.
4
Press the Recording Start/Stop Button to stop 
recording.
To make thumbnail images after video recording 
manually
1
Set “NAVIGATION” to “MANUAL”. (
2
Set the Power Switch to “A” or “M”.
3
After the recording, press NAVI STORE.
● The “
” indicator appears briefly and the captured image 
is stored in the memory card as a thumbnail image.
NOTES:
● The remaining number of storable thumbnail images also 
appears on the screen when it reaches 10 or less. If “REC 
SELECT” is set to “
/
” in DSC Menu, the 
number shows how many 640 x 480 pixel images can be 
stored.
● If “5S” is set to “5S” or “Anim.” in MANUAL Menu, the 
NAVIGATION function will not work properly.
Program AE With Special Effects
Navigation Function
GR-DZ9_DZ7PAL_07Advanced.fm  Page 38  Tuesday, June 8, 2004  9:40 AM