JVC LYT1094-001A 사용자 설명서

Master Page: Left

24. The CHARGE indicator on the 

AC Power Adapter/Charger 
does not light.

24. • The temperature of the 

battery is extremely high/low.

• Charging is difficult in places 

subject to extremely high/
low temperatures.

24. • To protect the battery, it is 

recommended to charge it in 
places with a temperature of 
10°C to 35°C. (

25. “SET DATE/TIME!” appears.

25. • The built-in clock’s 

rechargeable lithium battery 
is discharged.

• The previously set date/time 

is erased.

25. • Connect the camcorder to an 

AC outlet using the AC Power 
Adapter/Charger for over 24 
hours to charge the clock’s 
lithium battery. (

26. There is no picture.

26. • The camcorder is not getting 

power, or some other 
malfunction exists.

26. • Turn the camcorder’s power 

off and on again. (

27. Some functions are not 

available using the MENU 
Button.

27. • The Power Switch is set to 

“A”.

27. • Set the Power Switch to “M”. 

28. Files stored in the memory 

card cannot be deleted.

28. • Files stored in the memory 

card are protected.

28. • Remove protection from the 

files stored in the memory 
card and delete them. 
(

墌 pg. 27 –28)

29. When the image is printed 

from the printer, a black bar 
appears at the bottom of the 
screen.

29. • This is not a malfunction.

29. • By recording with “DIS” 

activated (

墌 pg. 31, 36) this 

can be avoided.

30. When the camcorder is 

connected via the DV 
connector, the camcorder does 
not operate.

30. • The DV cable was plugged/

unplugged with power 
turned on.

30. • Turn the camcorder’s power 

off and on again, then 
operate it.

31. The rear of the LCD monitor is 

hot.

31. • The light used to illuminate 

the LCD monitor causes it to 
become hot.

31. • Close the LCD monitor to 

turn it off or set the Power 
Switch to “OFF”, and let the 
unit cool down.

32. Images on the LCD monitor 

appear dark or whitish.

32. • In places subject to high 

temperature, images become 
dark due to the 
characteristics of the LCD 
monitor. When this happens, 
the displayed colours differ 
from those that are actually 
recorded. This is not a defect 
of the camcorder.

• When the LCD monitor’s 

LED light reaches the end of 
its service life, images on the 
LCD monitor become dark. 
Consult your nearest JVC 
dealer.

32. • Adjust the brightness and 

angle of the LCD monitor. 
(

墌 pg. 12, 13)

GR-DVP9-8PAL.book  Page 68  Friday, February 7, 2003  12:35 PM