JVC GR-SXM480A 사용자 설명서

1

@

• During charging or discharging, the camcorder

cannot be operated.

• Charging and discharging is not possible if the

wrong type of battery is used.

• When charging the battery pack for the first time

or after a long storage period, the CHARGE lamp

*

 may not light. Remove the battery pack from

the camcorder, then try charging again.

• If a fully-charged battery’s operation time remains

extremely short, the battery is worn out. Please
purchase a new one.

• Perform charging where the temperature is

between 10°C and 35°C. 20°C to 25°C is the ideal
temperature range for charging. If the environment
is too cold, charging may be incomplete.

• Charging time varies according to the ambient

temperature and the status of the battery pack.

• Since the AC Adapter processes electricity

internally, it becomes warm during use. Be sure to
use it only in well-ventilated areas.

• The following operation stops charging or

discharging:
• Set the Power Switch 

@

 to “

”, “

” or “

”.

• Disconnect the AC Adapter from the camcorder.
• Unplug the AC Adapter’s power cord from the

AC outlet.

• Detach the battery from the camcorder.

• Using the optional AA-V15 AC Power Adapter/

Charger, you can charge the BN-V11U/V12U/
V20U/V400U battery pack without the camcorder.
However, it cannot be used as an AC adapter.

• To avoid interference with reception, do not use

the AC Adapter near a radio.

• Recording time is reduced significantly when

Zoom or Record-Standby mode is engaged
repeatedly or the LCD monitor* is used
repeatedly.

• Before extended use, it is recommended that you

prepare enough battery packs to cover 3 times the
planned shooting time.

* Applicable models only.

1) Set the Power Switch 

@

 to “

”.

2) Press the MENU Wheel

 

1

 in. The Menu

Screen appears.

• You can select the language (ENGLISH,

CHINESE or ARABIC) of messages in menu
screens (

 pg. 18, 21 “MENU LANG.” in

SYSTEM MENU).

3) Rotate the MENU Wheel 

1

 to select

“

4

TO SYSTEM MENU” and press it to display

SYSTEM MENU. Rotate the MENU Wheel 

1

 to

select “

4

NEXT” and press it to display the next

page.

4) Rotate the MENU Wheel 

1

 to select “DATE/

TIME” and press it. The DATE/TIME Menu
appears.

5) To set “YEAR”, “MONTH”, “DAY” or “TIME”

(hour/minute), rotate the MENU Wheel 

1

 to

select the desired item, and press it. When the
setting begins blinking, rotate the MENU Wheel

1

 until the correct setting appears and then

press it. The setting stops blinking.

6) When none of these settings (“YEAR”,

“MONTH”, “DAY”, “TIME”) blinks, rotate the
MENU Wheel 

1

 to select “EXIT”, and press it.

The Menu Screen reappears with the highlight
bar on “

4

RETURN”.

7) Press the MENU Wheel 

1

 in to close the Menu

Screen.

• To display the date and time in the camcorder’s

display and on a connected TV, see DATE/TIME
DISP. (

 pg. 19) in CAMERA MENU.

• The date/time cannot be stored in memory if the

built-in clock battery runs out. Consult an
authorised JVC dealer for replacement, or set the
date/time as necessary before you start shooting.