JVC GZ-MG57E 사용자 설명서

다운로드
페이지 72
EN
 3
Read This First! – How to Handle the Hard Disk Camera
Please read the following instructions before 
using the camera.
It is recommended to copy your important recorded 
data to a DVD or other recording media for storage. 
(
Before the actual recording of important data, 
make a trial recording and play back the recorded 
data to check that the video and sound have been 
recorded correctly.
● The SD cards that are guaranteed to work with 
this camera are those by PanasonicTOSHIBA
pqi (still image only) and SanDisk. If other media 
are used, they may fail to record data correctly, or 
they may lose data that had already been 
recorded.
● For video recording, use a high-speed SD card 
(at least 10 MB/s).
● MultiMediaCards are not supported.
Before using this camera, format the built-in hard 
disk or SD cards. This will also ensure stable 
speeds and operation when accessing the 
recording medium. (
Do not cover the area near the lens, stereo 
microphone, or camera sensor with your finger or 
other object while recording. (
● When using the battery, the power will turn off 
automatically to conserve power. Use the power 
switch to turn on the power again.
● When using the AC adapter, the access lamp 
lights up, and the LCD turns off (the camera 
enters the sleep mode).
This camera uses a microcomputer. Factors such 
as background noise and interference can prevent 
it from operating correctly. If the camera does not 
operate correctly, reset the camera. (
When requesting repairs for breakdowns by your 
dealer or JVC service centre, be sure to bring your 
camera together with the SD card. If one of them is 
not included, the cause cannot be diagnosed, and 
the repair cannot be made properly.
● When discarding batteries, environmental 
problems must be considered and the local rules 
or laws governing the disposal of these batteries 
must be strictly followed.
● If the camera is subjected to electrostatic 
discharge, turn the power off before using it 
again.
● This product includes patented and other 
proprietary technology and will only operate with 
a JVC Data Battery. Use the JVC BN-VF707U/
VF714U/VF733U battery packs. Using generic 
non-JVC batteries can cause damage to the 
internal charging circuitry.
● If the battery operation time remains extremely 
short even after the battery is fully charged, the 
battery is worn out and needs to be replaced. 
Please purchase a new one.
● Since the AC adapter processes electricity 
internally, it becomes warm during use. Be sure 
to use it only in well-ventilated areas.
● After 5 minutes has elapsed in record-standby 
mode, the camera will automatically turn off its 
power supplied from the AC adapter. In this case, 
battery charge starts if the battery is attached to 
the camera.
Make a backup of important recorded data
Make a trial recording
Check the compatibility of recording 
media
Format recording medium before use
Make sure you hold the camera correctly 
during recording
When a certain length of time passes 
without operation
Reset the camera if it does not operate 
correctly
If a problem occurs with the SD card, bring 
the card together with the camera for 
repairs
Precautions on handling batteries
INFORMATION
Video recording (with sound) that was made 
especially for demonstration at shops might be 
remaining on the hard disk of the camera that you 
have purchased.
To delete this video file, please refer to “Deleting 
Files” (
M6E3PAL.book  Page 3  Monday, May 29, 2006  8:50 AM