JVC GZ-MG20U 사용자 설명서
GETTING STARTED
EN
19
MasterPage: Start_Right
The brightness of the display can be adjusted.
1
Set the power switch to
or
while
pressing down the lock button located on the
switch.
switch.
2
Open the LCD monitor fully. (
3
Press MENU. The menu screen appears.
4
Press
/
to select [DISPLAY], then press
49.
5
Press
/
to select
[BRIGHT], and press 49.
The brightness control
indicator appears.
The brightness control
indicator appears.
6
Press
/
until the appropriate brightness
is reached.
7
Press 49 to clear the brightness control
indicator from the display.
1
Adjust the velcro strip.
2
Pass your right hand
through the loop and grasp
the grip.
the grip.
3
Adjust your thumb and
fingers through the grip to
easily operate the
recording start/stop button,
power switch and zoom
lever. Be sure to fasten the
velcro strip to your
preference.
easily operate the
recording start/stop button,
power switch and zoom
lever. Be sure to fasten the
velcro strip to your
preference.
To attach the camera to a
tripod, align the direction
stud and screw to the
mounting socket and
stud hole on the camera.
Then tighten the screw
clockwise.
tripod, align the direction
stud and screw to the
mounting socket and
stud hole on the camera.
Then tighten the screw
clockwise.
● Some tripods are not
equipped with studs.
Brightness Adjustment of the
Display
Display
Grip Adjustment
Tripod Mounting
M5E3US.book Page 19 Wednesday, September 7, 2005 4:38 PM