JVC GZ-MG40E 사용자 설명서

– 13 –

MasterPage: Body

NOTES:

● If PowerDirector/PowerProducer/PowerDVD have

already been installed on the PC, uninstall them
before installing the provided software.
Video files captured with this camera can only be
handled on the provided software. Please install
and use the provided software (PowerDirector
Express NE, PowerProducer 2 Gold NE,
PowerDVD 5 NE).

● If you perform installation of a software that is

already installed, uninstallation will start. In this
case, perform the installation again after
uninstallation is finished.

● Windows Messenger has to been closed during

CyberLink DVD Solution installation. If it is running
during installation, [Information] screen appears.

To close Windows Messenger:

1) While holding [Ctrl + Alt] key, click [Delete]
key so that [Task Manager] appears.

2) Click [Processes] tab.

3) Select [msmsgs.exe].

4) Click [End process].

Connecting the USB cable

Connect the USB cable to copy still images and
video files in a recording medium to the PC.

To assure safety, make sure all units are

turned off before making any connections.

Use the USB cable to connect the camera

to the PC.

NOTES:

● It is recommended to use the AC Adapter as the

power supply instead of the battery pack.

● When the USB cable is connected, turning on or off

the camera causes malfunctions of the PC.

● Connect the camera directly to the PC, not through

the hub.

● Do not use an extension USB cable.

Connections (Windows

)

Camera

To USB connector

USB cable

M5E3_InstallGuide.book Page 13 Wednesday, July 6, 2005 11:53 AM