JVC GZ-MG37EK 사용자 설명서

다운로드
페이지 72
EN
 63
Indication
Meaning
NUMBER OF FOLDERS 
OVERFLOW
● Appears when the number of folders exceeds the limit for 
file copy/move operation.
MEMORY CARD ERROR! 
REINSERT CARD OR CHANGE 
CARD.
● Appears when the camera does not recognise the loaded 
SD card. Remove the card once and insert it again or 
replace with another card. 
FILE SYSTEM MAY HAVE 
PROBLEM. FORMAT IS 
RECOMMENDED AFTER 
COPYING WANTED DATA.
● The file system of the recording medium may have a 
problem. It is recommended to copy the data for backup 
purposes, then format the medium. 
VIDEO MANAGEMENT FILE IS 
BROKEN. TO RECORD/
PLAYBACK VIDEO, 
RECOVERY IS REQUIRED. 
RECOVER?
● The video management file is broken. Recovery is 
required to record or play back video files. Press 
/
 to 
select [YES], then press 49 to recover the video 
management file. If the desired video file is not displayed 
on the video index screen in spite of the file recovery, the 
file has been moved to the [EXTMOV] folder. Press the 
REC/SNAP button on the index screen to display [MPG], 
and then select the desired file.
NO VIDEO MANAGEMENT FILE
VIDEO FILES HAVE BEEN 
MOVED TO MPEG FOLDER
● The data cannot be recorded properly, or the video 
management file has been deleted or cannot be found. 
Video files have been moved to MPEG (EXTMOV) folder.
CAN NOT READ EVENT 
INFORMATION
● Appears when the event information cannot be read.
PLAYLIST’S MANAGEMENT 
INFORMATION IS BROKEN. 
REMAKE PLAYLIST AGAIN.
● The management information of the playlist is broken. 
Create the playlist again.
NO REGISTERED SCENES IN 
PLAYLIST. SOME OF SCENES 
MAY NOT BE PLAYED BACK.
● The video files registered in the playlist do not exist. Some 
of the scenes may not be played back.
REGISTERED SCENES IN 
PLAYLIST IS EMPTY. THIS 
PLAYLIST WILL BE DELETED.
● There are no scenes registered in the playlist. The playlist 
will be deleted.
CAMERA TEMPERATURE IS 
GOING UP. TURN CAMERA 
OFF, PLEASE WAIT.
● The temperature of the camera is too high. Turn off the 
power, then wait for a while.
CAMERA TEMPERATURE IS 
TOO LOW. KEEP CAMERA 
POWER ON, PLEASE WAIT.
● The temperature of the camera is too low. Keep the power 
on and wait for a while.
M6E3PAL.book  Page 63  Wednesday, June 14, 2006  5:12 PM