JVC GZ-HD7U 사용자 설명서
18
Grip Adjustment
Open the pad and make grip adjustments.
Lens Cover
When not using the camera, close the lens
cover to protect the lens.
cover to protect the lens.
Open the lens cover
Close the lens cover
NOTE
Do not push the lens cover strongly. Doing so
may cause damage to the lens.
may cause damage to the lens.
Checking the Remaining Battery
Power
Power
Preparation:
•
Set the power/mode switch to OFF.
•
Attach the battery pack.
INDEX
BATTERY CONDITION
FINDER
min
LCD MONITOR
MAX TIME
min
100%
50%
0%
Battery information is displayed for approx. 3
seconds if the button is pressed and released
quickly, and for approx. 15 seconds if the
button is pressed and held for several seconds.
seconds if the button is pressed and released
quickly, and for approx. 15 seconds if the
button is pressed and held for several seconds.
NOTES
•
If “COMMUNICATING ERROR” appears,
there may be a problem with your battery.
In such a case, consult your nearest JVC
dealer.
In such a case, consult your nearest JVC
dealer.
•
The recordable time display should only be
used as a guide. It is displayed in 10 minute
units.
units.
Tripod Mounting
Align the camera stud hole with the tripod
stud, and the mounting socket with the screw,
and then rotate the camera clockwise to
mount it to the tripod.
stud, and the mounting socket with the screw,
and then rotate the camera clockwise to
mount it to the tripod.
NOTE
Do not use a tripod on unsteady or unlevel
surfaces. It could tip over, causing serious
damage to the camera.
surfaces. It could tip over, causing serious
damage to the camera.
Lens Cover
Switch
Switch
Power/Mode
Switch
Switch
Bottom of the Camera
Other Settings