JVC GZ-HD3U 사용자 설명서

•

 Displays the remaining battery power.

–

•

 As the battery power comes close to nil, the battery 

indicator blinks. When the battery power is exhausted, 
power turns off automatically.

–

•

 Appears when the date/time is not set.

•

 The built-in clock’s rechargeable lithium battery is 

discharged, so the previously set date/time is erased.
Connect the camera to an AC outlet using the AC adapter 
for over 24 hours to charge the clock’s lithium battery. Then 
set the date/time.

17
16

•

 Appears for 5 seconds after power is turned on in recording 

mode if the lens cover is closed or when it is dark.

–

•

 Perform clean up to restore the capacity of the recording media.

•

 Turn off the camera. Remove the card and insert it again. 

Turn on the camera after inserting the SD card. If the error 
message appears again, replace the card with one that is 
certifi ed to operate correctly.

71 
19

•

 Appears when you attempt recording when the write/erase 

protection tab on the SD card is set to the “LOCK” position.

37

•

 The video management fi le is broken. Recovery is required 

to record or play back video fi les. Move the set lever to 

¡ / 

¢ to select [YES], then press down to recover the video 
management fi le.

–

•

 Appears when the event information cannot be read. 

Register the fi le to an event.

40

•

 The writing speed of recording medium is slow, or the 

recording medium is corrupted. Use an SD card that is 
guaranteed to operate correctly.

•

 The hard disk was subjected to vibrations or jolts. Be careful 

not to subject the hard disk to vibrations or jolts.

•

 Appears when the recording medium is full and recording 

is not possible. Delete unnecessary fi les, or replace the SD 
card.

19

–

37

•

 Appears when an incompatible USB device is connected to 

the camera.

•

 Appears when the connected DVD burner is switched off. If 

you want to use the DVD burner, switch the power on.

–

–

High

Exhausted