JVC GR-SXM267 사용자 설명서

.

1

@

!

Be sure to fully discharge a battery pack by
performing the following steps before storing it for
a long period of time, otherwise the battery
performance will be reduced.
1) Attach the battery to the camcorder with no

cassette inserted.

2) Set the Power Switch 

@

 to “

” or “

” while

pressing down the Lock Button 

!

 located on the

switch.

• During charging or discharging, the camcorder

cannot be operated.

• Charging and discharging is not possible if the

wrong type of battery is used.

• When charging the battery pack for the first time

or after a long storage period, the CHARGE lamp

)

 may not light. Remove the battery pack from

the camcorder, then try charging again.

• If a fully-charged battery’s operation time remains

extremely short, the battery is worn out. Please
purchase a new one.

• Perform charging where the temperature is

between 10

°

C and 35

°

C (50

°

F and 95

°

F). 20

°

C to

25

°

C (68

°

F to 77

°

F) is the ideal temperature range

for charging. If the environment is too cold,
charging may be incomplete.

• Charging time varies according to the ambient

temperature and the status of the battery pack.

• Since the AC Adapter processes electricity

internally, it becomes warm during use. Be sure to
use it only in well-ventilated areas.

• The following operation stops charging or

discharging:
• Set the Power Switch 

@

 to “

”, “

” or “

”.

• Disconnect the AC Adapter from the camcorder.
• Unplug the AC Adapter’s power cord from the

AC outlet.

• Detach the battery from the camcorder.

• Using the optional AA-V15 AC Power Adapter/

Charger, you can charge the BN-V11U/V12U/
V20U/V400U battery pack without the camcorder.
However, it cannot be used as an AC adapter.

• To avoid interference with reception, do not use

the AC Adapter near a radio.

• Recording time is reduced significantly when

Zoom or Record-Standby mode is engaged
repeatedly or the LCD monitor* is used repeat-
edly.

• Before extended use, it is recommended that you

prepare enough battery packs to cover 3 times the
planned shooting time.

* Applicable models only.

1) Set the Power Switch 

@

 to “

” while pressing

down the Lock Button 

!

 located on the switch.

2) Press the MENU Wheel

 

1

 in. The Menu Screen

appears.

3) Rotate the MENU Wheel 

1

 to select

“

4

TO SYSTEM MENU” and press it to display

SYSTEM MENU. Rotate the MENU Wheel 

1

 to

select “

4

NEXT” and press it to display the next

page.

4) Rotate the MENU Wheel 

1

 to select “DATE/

TIME” and press it. The DATE/TIME Menu
appears.

5) To set “YEAR”, “MONTH”, “DAY” or “TIME”

(hour/minute), rotate the MENU Wheel 

1

 to

select the desired item, and press it. When the
setting begins blinking, rotate the MENU Wheel

1

 until the correct setting appears and then

press it. The setting stops blinking.

6) When none of these settings (“YEAR”,

“MONTH”, “DAY”, “TIME”) blinks, rotate the
MENU Wheel 

1

 to select “

4

EXIT”, and press it.

The Menu Screen reappears with the highlight
bar on “

4

RETURN”.

7) Press the MENU Wheel 

1

 in to close the Menu

Screen.

• To display the date and time in the camcorder’s

display and on a connected TV, see DATE/TIME
DISP. (

 pg. 21) in SYSTEM MENU.

• The date/time cannot be stored in memory if the

built-in clock battery runs out. Consult an author-
ised JVC dealer for replacement, or set the date/
time as necessary before you start shooting.

GR-SXM967-EN

3/11/03, 10:33 AM

7