JVC GR-AX18EG 사용자 설명서

 EN

ACCESS R.A. EDIT COUNTER

DISPLAY

Press PLAY/PAUSE, then press ON/OFF and the
counter display appears on the LCD monitor or in
the viewfinder and the screen of the connected TV.

REGISTER BEGINNING OF SCENE

Press REW or FF to locate the beginning of a scene
you want, then press IN/OUT to register that point.
The data appears under “IN” on the display.

REGISTER END OF SCENE

Press REW or FF to locate the end of the scene and
press IN/OUT to register it. The data appears under
“OUT” on the display. The total time of the
registered scene(s) is displayed at the bottom of the
screen.

REGISTER ADDITIONAL SCENES

Repeat steps 2 and 3 for each additional scene
(as many as 8).

MAKE CORRECTIONS

Press CANCEL during steps 2 and 3 to erase the
most recently registered point.

●

There must be at least one second between an in-point
and its corresponding out-point.

●

To ensure correct operation, there should be at least 15
seconds between an out-point and the next in-point.

●

Blank portions of tape cannot be registered as in-points
or out-points.

●

If it takes more than 5 minutes to search for an in-point,
the VCR’s Record-Pause mode is cancelled and editing
doesn’t take place.

●

Pressing ON/OFF clears all in- and out-points from
memory.

●

Leave a small margin for error around each in-point to
ensure the scene is recorded in its entirety.

 6

 1     0:00:25           0:01:05

 6