JVC GR-AX230 사용자 설명서

 EN

This camcorder’s 3-way power supply system lets you
choose the most appropriate source of power.

●

No function is available without power supply.

●

Use only specified power supply.

●

Do not use provided power supply units with other
equipment.

SUPPLY POWER

Connect the charger’s AC power cord to a wall
outlet.

ATTACH BATTERY PACK

Align the marks and slide the battery pack in the
direction of the arrow until it locks in place.

•The CHG. indicator begins blinking to indicate

charging has started.

DETACH BATTERY PACK

When the CHG. indicator stops blinking but stays lit,
charging is finished. Slide the battery pack opposite
the direction of the arrow.

BN-V11U

approx. 1 hr. 10 min.

approx.
3 hrs. 30 min.

BN-V12U

approx. 1 hr. 10 min.

approx.
3 hrs. 30 min.

BN-V22U

approx. 2 hrs. 10 min.

approx. 7 hrs.

BN-V25U

approx. 2 hrs. 40 min.

approx. 10 hrs.

Before detaching the power source,
make sure that the camcorder’s power
is turned off. Failure to do so can result
in a camcorder malfunction.

ATTACH BATTERY PACK

Hook its top end to the camcorder and push the
battery pack in until it locks in place.

DETACH BATTERY PACK

Slide BATT. RELEASE and pull out the battery pack.

The AC power adapter features a REFRESH
function that allows you to fully discharge
the battery pack before recharging. Perform
the REFRESH function after no less than 5
chargings.

..... attach the battery pack to the adapter

as shown in the above illustration.
Then push REFRESH. The REFRESH
indicator lights when discharging
starts, and goes out when discharging
is complete.

BN-V11U

75 (40)

75

BN-V12U

75 (40)

75

BN-V22U

150 (95)

155

BN-V25U

200 (125)

200

(   ) : when the video light is on. (GR-AX730 only)