JVC GR-X5AA 사용자 설명서

TROUBLESHOOTING

MasterPage: Left

Warning Indications

Displays the battery remaining power.

Remaining power level

As the battery power comes close to nil, the
battery remaining power indicator blinks.
When the battery power is exhausted, power
turns off automatically.
The battery remaining power indicator display
should only be used as a guide.
When the remaining recordable time is more
than 30 minutes, it is displayed in 10-minute
units and when the time is less than 30 minutes,
it is displayed in 5-minute units.

Appears when no tape is loaded. (

墌 pg. 16)

Appears when the erase protection tab is set to
“SAVE” while the power switch is set to “A” or
“M” and the VIDEO/MEMORY switch is set to
“VIDEO”. (

墌 pg. 14, 17)

Appears if dirt is detected on the heads during
recording. Use an optional cleaning cassette.
(

墌 pg. 58)

Appears if condensation occurs. When this
indication is displayed, wait more than 1 hour
until condensation disappears.

Appears if a tape is not loaded when the
recording start/stop button or SNAPSHOT
button is pressed while the power switch is set to
“A” or “M” and the VIDEO/MEMORY switch is
set to “VIDEO”.

Appears when the tape ends during recording or
playback.

● Appears when the date/time is not set.

(

墌 pg. 15)

● The built-in clock battery has run out and the

previously set date/time has been erased.
Consult your nearest JVC dealer for
replacement.

Appears for 5 seconds after power is turned on if
the lens cap is attached or when it is dark.

Appears if audio dubbing is attempted on a
blank portion of a tape. (

墌 pg. 50)

● Appears if audio dubbing is attempted on a

tape recorded in the LP mode. (

墌 pg. 50)