JVC GR-AX470 사용자 설명서

There are two basic types of connections. When making
the connections, refer also to your VCR and TV
instruction manuals.

Connection To A VCR [A]
(Editing, Dubbing and Playback)

NOTE:

Use the provided Audio and Video cables.

CONNECT CAMCORDER TO VCR

As shown in the illustration at left, connect the
Audio and Video cables between the AUDIO and
VIDEO connectors on the camcorder and those on
the VCR.

SUPPLY POWER

Turn on the camcorder, the VCR and the TV.

SELECT MODE

Set the VCR to its AUX input mode, and set the TV
to its VIDEO mode.

Connection To A TV With A/V Input
Connectors [B] (Playback ONLY)

NOTE:

Use the provided Audio and Video cables.

CONNECT CAMCORDER TO TV

As shown in the illustration at left, connect the
Audio and Video cables between the AUDIO and
VIDEO connectors on the camcorder and those on
the TV.

SELECT MODE

Set the TV to its VIDEO or AV mode (as specified in
its instructions).

NOTES:

●

It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery
pack.

●

To monitor the picture and sound from the camcorder
without inserting a tape, set the camcorder’s Power
switch to “CAMERA”, then set your TV to the appropri-
ate input mode.

●

If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the TV
as interference will occur in the camcorder playback
picture.

PLAYBACK

Basic Connections

When
connecting the
cables, open
the jack cover.

To AUDIO and
VIDEO connectors

To AUDIO and
VIDEO IN
connectors

Audio and Video
cables (provided)

If your TV/VCR
has the SCART
connector, use
the provided
cable adapter.

VCR