JVC GY-DV550U 사용자 설명서

75

302:

BACK SPACE

b-SP

307:

LONG PAUSE
TIME

LGPt

396:

BATTERY TYPE

bAtt

398:

SSF MODE

SSF

399:

REMOTE FF/REW
MODE

rEFF

403:

U-BIT SLAVE

UbSc

416:

NON DROP/
DROP

tcG

516:

DISPLAY SELECT

diSP

STAND-
ARD

30MIN

12V

OFF

FF/
REW

TC

DROP

TC

Selection of amount of back space for recording pause.
STANDARD : Normally use this setting.
QUICK

: Compared to STANDARD, the back space

becomes approximately 0.4 seconds shorter.
Use this setting when you want to start
shooting quickly. However, in the REGEN
mode, the time code may not continue.

To select the time (minutes) before the tape protect mode (drum head rotation
stopped) is engaged when the record-pause, still or stop condition continues.
3MIN

: 3 minutes

30MIN : 30 minutes
* When used in a cold environment, the setting will be

3 minutes regardless of the setting.

To be set in accordance with the used battery back type.
12V

: Choose this setting when using 12V battery

(12V DC Flat shape type).

13.2V : Choose this setting when using 13.2V battery

(Anton-Bauer Trimpack 13, Propack 13,
Magnum 13, Compack 13).

14.4V : Choose this setting when using 14.4V battery

(Anton-Bauer Trimpack 14, Propack 14,
Magnum 14, Compack 14).

Selection of the S.S.F. (Super Scene Finder) mode.
S.S.F. function:While recording, the time code data of a
desired recorded scene is stored in the unit's memory
when the TAKE button on the front section is pressed.
Settings cannot be changed during recording or SAVE mode.
OFF

: S.S.F. function is not available.

CUE MODE : Selects the CUE mode.

When the TAKE button is pressed, the time code data of
the scene recorded at that point is stored in the memory.

MARK MODE : Selects the MARK mode.

When the TAKE button is pressed the first time, the time
code of this point is stored as start point of the scene. When
the TAKE button is pressed the second time, the time code
of this point is stored as ending point of the scene.

For details on the S.S.F. function, see page 66.
• When the VCR Setup Menu item No. 398 S.S.F. MODE

is set to CUE or MARK, the time code generator’s
running method is internally set to the REGEN mode.

Specifies the operation when FF/REW signal is received
from the remote connector during playback.
FF/REW : FF/REW operation performed.
SEARCH : Search operation performed.

To set whether user’s bits also should be slave-locked
when slave-locking with external time code generator.
TC&UB : User’s bits also slave-locked
TC 

 

   

 

  

 

: User’s bits are not slave-locked

Selection of the time code generator's framing mode as
either drop or non-drop mode.
DROP : The internal time code generator runs in drop mode.

Choose this setting when emphasizing the recorded time.

NON DROP: The internal time code generator runs in non drop mode.

Choose this setting when emphasizing the frame number.

Selection of the appearance of the counter display when
the COUNTER switch is set to “TC” or “UB”.
TC

: The time code is displayed.

CLOCK: The date/time is displayed.

STANDARD
QUICK

St
qU

3MIN
30MIN

03
30

12V
13.2V
14.4V

12
13
14

OFF
CUE MODE
MARK MODE

oF
cU
nr

FF/REW
SEARCH
FF
SH

TC&UB
TC
on
oF

DROP
NON DROP

dF
nF

TC
CLOCK
tc
cL

Upper row: Viewfinder display
Lower row: Counter display indication

• If this setting is neglected, the unit’s display of remaining of battery

power and generation of battery alarm will not work correctly.

• This setting is valid when battery pack is used. It

is invalid when a DC power supply is used.