JVC GR-AX527 사용자 설명서

To eliminate noise bars that appear
on the screen.

1) Press either TRACKING button as

many times as necessary for best
picture.

● To reset TRACKING to the original

preset, press both TRACKING
buttons simultaneously.

● Manual Tracking may not work with

tapes recorded on other VCRs or
camcorders.

To pause during playback.

1) Press PLAY/PAUSE during

playback.

2) To resume normal playback, press

PLAY/PAUSE again.

Noise bars appear and pictures may
become monochrome during Still
Playback. This is normal.

To allow high-speed search in either
direction.

Forward Search
1) Press FF during playback. (Speed is

3 times normal in SP, and 7 times
normal in EP mode.)

Reverse Search
1) Press REW during playback.

(Speed is as noted above.)

Noise bars appear and pictures may
become monochrome in Shuttle
Search. This is normal.

To make it easier to locate a specific
tape segment.

1) Press COUNTER R/M and hold for

more than 2 seconds. The counter
resets to “0:00:00”.

2) Press COUNTER R/M. “M”

appears.

3) After recording or playback, press

STOP, then REW. The tape
automatically stops at or close to
0:00:00.

4) Press PLAY/PAUSE to start

playback.

● The counter memory functions in

the FF and REW modes.

● To disable Counter Memory

Function, press COUNTER R/M so
the “M” disappears.