JVC GZ-MG130UA 사용자 설명서
53
ENGLISH
Trouble
Action
Recor
ding
White balance setting
cannot be activated.
cannot be activated.
•
Do not select the sepia (SEPIA) or monotone
(MONOTONE) mode before setting white balance.
23
The continuous
shooting speed is
slow.
shooting speed is
slow.
•
The continuous shooting speed will drop when
repeatedly making continuous shots, when using certain
recording media, or under certain recording conditions.
recording media, or under certain recording conditions.
–
Pla
ybac
k
Playback cannot be
performed.
performed.
•
Select the recording medium properly.
•
To watch images on a TV, set the TV’s input mode or
channel that is appropriate for video playback.
47, 48
29
The same image is
displayed for a long
time during video
playback, or motion is
choppy.
displayed for a long
time during video
playback, or motion is
choppy.
•
The surface of the disk or card is damaged. It is
recommended to run check disk regularly on the PC,
providing that there is no data on the hard disk of the
camera.
providing that there is no data on the hard disk of the
camera.
–
The black & white
fader does not work.
fader does not work.
•
Do not select the sepia (SEPIA) or monotone
(MONOTONE) mode before setting white balance.
28
There is a noise
during playback.
during playback.
•
The sound of the hard disk drive may have been
recorded if the camera was moved suddenly during
recording. Do not move or shake the camera suddenly
during recording.
recording. Do not move or shake the camera suddenly
during recording.
–
During video
playback, the U
indicator fl ashes.
playback, the U
indicator fl ashes.
•
The temperature of the camera is increasing. If the
camera continues to heat up, playback may be stopped
to protect the recording medium. In this case, turn off the
power, and then wait until the camera cools down.
to protect the recording medium. In this case, turn off the
power, and then wait until the camera cools down.
–
Other pr
ob
lems
lems
Files cannot be
deleted.
deleted.
•
Remove protection from the fi les and delete them.
31
When the image
is printed from the
printer, a black bar
appears at the bottom
of the screen.
is printed from the
printer, a black bar
appears at the bottom
of the screen.
•
This is not a malfunction. This can be avoided by
recording with DIS activated.
47
The data process is
too slow after the
power is switched
on or the mode is
changed.
too slow after the
power is switched
on or the mode is
changed.
•
There is a large number of still images (approx. 1,000
or more) stored in the recording medium. Copy the
stored fi les to a PC, and delete them from the recording
medium.
stored fi les to a PC, and delete them from the recording
medium.
30
The SD card cannot
be removed from the
camera.
be removed from the
camera.
•
Push the SD card in a few more times.
15
The CREATE DVD
screen is displayed in
the LCD monitor, and
no other operations
can be performed.
screen is displayed in
the LCD monitor, and
no other operations
can be performed.
•
Another operation is being attempted while a DVD burner
that is switched on is connected. Switch off the DVD
burner power, and switch the camera’s power off and
back on again.
burner power, and switch the camera’s power off and
back on again.
–