JVC GYHM150U 사용자 설명서

Alarm displays on the LCD monitor and viewfinder screens, as well as the tally lamps are output as follows according to the alarm 
status.

● This camera recorder makes use of a microcomputer. Noise interference from external sources may prevent it from functioning 

properly. When this occurs, turn off and on the power of the camera recorder again.

SDHC/SDXC card is not supported (a type 
other than Class 6/10).
(***: A, B, A/B)

Insert an SDHC/SDXC card that is compliant 
with Class 6/10.
(

● An irrecoverable error is detected.

● SDHC/SDXC card reading/writing error. 

(Faulty SDHC/SDXC card)

(***: A, B, A/B)

Replace the SDHC/SDXC card with a new 
one.

SDHC/SDXC card is not formatted using this 
camera recorder.
(***: A, B, A/B)

Format the card using this camera recorder.
(

● SDHC/SDXC card requires restoring.

● Recording is not successfully completed. 

(Temporary blackout/card removed)

(***: A, B, A/B)

Restore the card using this camera recorder.
(

● The lens cover may be closed. (Only 

checked during startup.)

Open the lens cover.

^

● [REC] button is pressed when an SDHC/

SDXC card is not inserted.

● No SDHC/SDXC card is found in the slot to 

record to during the Backup Rec mode.

Insert an SDHC/SDXC card.
 ( 

A Page 20, 43 )

^

No SDHC/SDXC card is found in Media mode 
or when the thumbnail screen is displayed.

Insert an SDHC/SDXC card. (

^

No clips are found on the inserted SDHC/
SDXC card in Media mode or when the 
thumbnail screen is displayed.

Insert an SDHC/SDXC card that contains 
playable clips.
( 

A Page 20, 48 )

^

No viewable clips are found on the card for 
Clip Review.

Insert an SDHC/SDXC card that contains clips 
that can be reviewed.
( 

A Page 20, 48 )

^

[REC] button is pressed when the write-protect 
switch of the SDHC/SDXC card is set.

Turn off the write-protect switch of the SDHC/
SDXC card, or insert a recordable SDHC/
SDXC card.
(

● Card is removed while recording is in 

progress.

● Card is removed while formatting is in 

progress.

● Card is removed while restoring is in 

progress.

● Card is removed while adding the OK 

mark.

● Card is removed while writing a setup file.

● Card is removed while deleting a clip.

(*: A, B)

Restore the card using this camera recorder.
(

GY-HM150U.book  Page 94  Monday, September 5, 2011  1:48 AM